Langbahn Team – Weltmeisterschaft

Physical properties of soil

For the academic discipline, see Soil physics.

The physical properties of soil, in order of decreasing importance for ecosystem services such as crop production, are texture, structure, bulk density, porosity, consistency, temperature, colour and resistivity.[1] Soil texture is determined by the relative proportion of the three kinds of soil mineral particles, called soil separates: sand, silt, and clay. At the next larger scale, soil structures called peds or more commonly soil aggregates are created from the soil separates when iron oxides, carbonates, clay, silica and humus, coat particles and cause them to adhere into larger, relatively stable secondary structures.[2] Soil bulk density, when determined at standardized moisture conditions, is an estimate of soil compaction.[3] Soil porosity consists of the void part of the soil volume and is occupied by gases or water. Soil consistency is the ability of soil materials to stick together. Soil temperature and colour are self-defining. Resistivity refers to the resistance to conduction of electric currents and affects the rate of corrosion of metal and concrete structures which are buried in soil.[4] These properties vary through the depth of a soil profile, i.e. through soil horizons. Most of these properties determine the aeration of the soil and the ability of water to infiltrate and to be held within the soil.[5]

Influence of Soil Texture Separates on Some Properties of Soils[6]
Property/behavior Sand Silt Clay
Water-holding capacity Low Medium to high High
Aeration Good Medium Poor
Drainage rate High Slow to medium Very slow
Soil organic matter level Low Medium to high High to medium
Decomposition of organic matter Rapid Medium Slow
Warm-up in spring Rapid Moderate Slow
Compactability Low Medium High
Susceptibility to wind erosion Moderate (High if fine sand) High Low
Susceptibility to water erosion Low (unless fine sand) High Low if aggregated, otherwise high
Shrink/Swell Potential Very Low Low Moderate to very high
Sealing of ponds, dams, and landfills Poor Poor Good
Suitability for tillage after rain Good Medium Poor
Pollutant leaching potential High Medium Low (unless cracked)
Ability to store plant nutrients Poor Medium to High High
Resistance to pH change Low Medium High

Texture

Main article: Soil texture
Soil types by clay, silt, and sand composition as used by the USDA
Iron-rich soil near Paint Pots in Kootenay National Park, Canada

The mineral components of soil are sand, silt and clay, and their relative proportions determine a soil's texture. Properties that are influenced by soil texture include porosity, permeability, infiltration, shrink-swell rate, water-holding capacity, and susceptibility to erosion. In the illustrated USDA textural classification triangle, the only soil in which neither sand, silt nor clay predominates is called loam. While even pure sand, silt or clay may be considered a soil, from the perspective of conventional agriculture a loam soil with a small amount of organic material is considered "ideal", inasmuch as fertilizers or manure are currently used to mitigate nutrient losses due to crop yields in the long term.[7] The mineral constituents of a loam soil might be 40% sand, 40% silt and the balance 20% clay by weight. Soil texture affects soil behaviour, in particular, its retention capacity for nutrients (e.g., cation exchange capacity)[8] and water.

Sand and silt are the products of physical and chemical weathering of the parent rock;[9] clay, on the other hand, is most often the product of the precipitation of the dissolved parent rock as a secondary mineral, except when derived from the weathering of mica.[10] It is the surface area to volume ratio (specific surface area) of soil particles and the unbalanced ionic electric charges within those that determine their role in the fertility of soil, as measured by its cation exchange capacity.[11][12] Sand is least active, having the least specific surface area, followed by silt; clay is the most active. Sand's greatest benefit to soil is that it resists compaction and increases soil porosity, although this property stands only for pure sand, not for sand mixed with smaller minerals which fill the voids among sand grains.[13] Silt is mineralogically like sand but with its higher specific surface area it is more chemically and physically active than sand. But it is the clay content of soil, with its very high specific surface area and generally large number of negative charges, that gives a soil its high retention capacity for water and nutrients.[11] Clay soils also resist wind and water erosion better than silty and sandy soils, as the particles bond tightly to each other,[14] and that with a strong mitigation effect of organic matter.[15]

Sand is the most stable of the mineral components of soil; it consists of rock fragments, primarily quartz particles, ranging in size from 2.0 to 0.05 mm (0.0787 to 0.0020 in) in diameter. Silt ranges in size from 0.05 to 0.002 mm (0.001969 to 7.9×10−5 in). Clay cannot be resolved by optical microscopes as its particles are 0.002 mm (7.9×10−5 in) or less in diameter and a thickness of only 10 angstroms (10−10 m).[16][17] In medium-textured soils, clay is often washed downward through the soil profile (a process called eluviation) and accumulates in the subsoil (a process called illuviation). There is no clear relationship between the size of soil mineral components and their mineralogical nature: sand and silt particles can be calcareous as well as siliceous,[18] while textural clay (0.002 mm (7.9×10−5 in)) can be made of very fine quartz particles as well as of multi-layered secondary minerals.[19] Soil mineral components belonging to a given textural class may thus share properties linked to their specific surface area (e.g. moisture retention) but not those linked to their chemical composition (e.g. cation exchange capacity).

Soil components larger than 2.0 mm (0.079 in) are classed as rock and gravel and are removed before determining the percentages of the remaining components and the textural class of the soil, but are included in the name. For example, a sandy loam soil with 20% gravel would be called gravelly sandy loam.

When the organic component of a soil is substantial, the soil is called organic soil rather than mineral soil. A soil is called organic if:

  1. Mineral fraction is 0% clay and organic matter is 20% or more
  2. Mineral fraction is 0% to 50% clay and organic matter is between 20% and 30%
  3. Mineral fraction is 50% or more clay and organic matter 30% or more.[20]

Structure

Main articles: Ped, Soil structure, and Structural Soil

The clumping of the soil textural components of sand, silt and clay causes aggregates to form and the further association of those aggregates into larger units creates soil structures called peds (a contraction of the word pedolith). The adhesion of the soil textural components by organic substances, iron oxides, carbonates, clays, and silica, the breakage of those aggregates from expansion-contraction caused by freezing-thawing and wetting-drying cycles,[21] and the build-up of aggregates by soil animals, microbial colonies and root tips[22] shape soil into distinct geometric forms.[23][24] The peds evolve into units which have various shapes, sizes and degrees of development.[25] A soil clod, however, is not a ped but rather a mass of soil that results from mechanical disturbance of the soil such as cultivation. Soil structure affects aeration, water movement, conduction of heat, plant root growth and resistance to erosion.[26] Water, in turn, has a strong effect on soil structure, directly via the dissolution and precipitation of minerals, the mechanical destruction of aggregates (slaking)[27] and indirectly by promoting plant, animal and microbial growth.

Soil structure often gives clues to its texture, organic matter content, biological activity, past soil evolution, human use, and the chemical and mineralogical conditions under which the soil formed. While texture is defined by the mineral component of a soil and is an innate property of the soil that does not change with agricultural activities, soil structure can be improved or destroyed by the choice and timing of farming practices.[23]

Soil structural classes:[28]

  1. Types: Shape and arrangement of peds
    1. Platy: Peds are flattened one atop the other 1–10 mm thick. Found in the A-horizon of forest soils and lake sedimentation.
    2. Prismatic and Columnar: Prismlike peds are long in the vertical dimension, 10–100 mm wide. Prismatic peds have flat tops, columnar peds have rounded tops. Tend to form in the B-horizon in high sodium soil where clay has accumulated.
    3. Angular and subangular: Blocky peds are imperfect cubes, 5–50 mm, angular have sharp edges, subangular have rounded edges. Tend to form in the B-horizon where clay has accumulated and indicate poor water penetration.
    4. Granular and Crumb: Spheroid peds of polyhedrons, 1–10 mm, often found in the A-horizon in the presence of organic material. Crumb peds are more porous and are considered ideal.
  2. Classes: Size of peds whose ranges depend upon the above type
    1. Very fine or very thin: <1 mm platy and spherical; <5 mm blocky; <10 mm prismlike.
    2. Fine or thin: 1–2 mm platy, and spherical; 5–10 mm blocky; 10–20 mm prismlike.
    3. Medium: 2–5 mm platy, granular; 10–20 mm blocky; 20–50 prismlike.
    4. Coarse or thick: 5–10 mm platy, granular; 20–50 mm blocky; 50–100 mm prismlike.
    5. Very coarse or very thick: >10 mm platy, granular; >50 mm blocky; >100 mm prismlike.
  3. Grades: Is a measure of the degree of development or cementation within the peds that results in their strength and stability.
    1. Weak: Weak cementation allows peds to fall apart into the three textural constituents, sand, silt and clay.
    2. Moderate: Peds are not distinct in undisturbed soil but when removed they break into aggregates, some broken aggregates and little unaggregated material. This is considered ideal.
    3. Strong:Peds are distinct before removed from the profile and do not break apart easily.
    4. Structureless: Soil is entirely cemented together in one great mass such as slabs of clay or no cementation at all such as with sand.

At the largest scale, the forces that shape a soil's structure result from swelling and shrinkage that initially tend to act horizontally, causing vertically oriented prismatic peds. This mechanical process is mainly exemplified in the development of vertisols.[29] Clayey soil, due to its differential drying rate with respect to the surface, will induce horizontal cracks, reducing columns to blocky peds.[30] Roots, rodents, worms, and freezing-thawing cycles further break the peds into smaller peds of a more or less spherical shape.[22]

At a smaller scale, plant roots extend into voids (macropores) and remove water[31] causing macroporosity to increase and microporosity to decrease,[32] thereby decreasing aggregate size.[33] At the same time, root hairs and fungal hyphae create microscopic tunnels (micropores) that break up peds.[34][35]

At an even smaller scale, soil aggregation continues as bacteria and fungi exude sticky polysaccharides which bind soil into smaller peds.[36] The addition of the raw organic matter that bacteria and fungi feed upon encourages the formation of this desirable soil structure.[37]

At the lowest scale, the soil chemistry affects the aggregation or dispersal of soil particles. The clay particles contain polyvalent cations, such as aluminium, which give the faces of clay layers localized negative charges.[38] At the same time, the edges of the clay plates have a slight positive charge, due to the sorption of aluminium from the soil solution to exposed hydroxyl groups, thereby allowing the edges to adhere to the negative charges on the faces of other clay particles or to flocculate (form clumps).[39] On the other hand, when monovalent ions, such as sodium, invade and displace the polyvalent cations (single displacement reaction), they weaken the positive charges on the edges, while the negative surface charges are relatively strengthened. This leaves negative charge on the clay faces that repel other clay, causing the particles to push apart, and by doing so deflocculate clay suspensions.[40] As a result, the clay disperses and settles into voids between peds, causing those to close. In this way the open structure of the soil is destroyed and the soil is made impenetrable to air and water.[41] Such sodic soil (also called haline soil) tends to form columnar peds near the surface.[42]

Density

See also: Bulk density § Soil
Representative bulk densities of soils. The percentage pore space was calculated using 2.7 g/cm3 for particle density except for the peat soil, which is estimated.[43]
Soil treatment and identification Bulk density (g/cm3) Pore space (%)
Tilled surface soil of a cotton field 1.3 51
Trafficked inter-rows where wheels passed surface 1.67 37
Traffic pan at 25 cm deep 1.7 36
Undisturbed soil below traffic pan, clay loam 1.5 43
Rocky silt loam soil under aspen forest 1.62 40
Loamy sand surface soil 1.5 43
Decomposed peat 0.55 65

Soil particle density is typically 2.60 to 2.75 grams per cm3 and is usually unchanging for a given soil.[44] Soil particle density is lower for soils with high organic matter content,[45] and is higher for soils with high iron-oxides content.[46] Soil bulk density is equal to the dry mass of the soil divided by the volume of the soil; i.e., it includes air space and organic materials of the soil volume. Thereby soil bulk density is always less than soil particle density and is a good indicator of soil compaction.[47] The soil bulk density of cultivated loam is about 1.1 to 1.4 g/cm3 (for comparison water is 1.0 g/cm3).[48] Contrary to particle density, soil bulk density is highly variable for a given soil, with a strong causal relationship with soil biological activity and management strategies.[49] However, it has been shown that, depending on species and the size of their aggregates (faeces), earthworms may either increase or decrease soil bulk density.[50] A lower bulk density by itself does not indicate suitability for plant growth due to the confounding influence of soil texture and structure.[51] A high bulk density is indicative of either soil compaction or a mixture of soil textural classes in which small particles fill the voids among coarser particles.[52] Hence the positive correlation between the fractal dimension of soil, considered as a porous medium, and its bulk density,[53] that explains the poor hydraulic conductivity of silty clay loam in the absence of a faunal structure.[54]

Porosity

Main article: Pore space in soil

Pore space is that part of the bulk volume of soil that is not occupied by either mineral or organic matter but is open space occupied by either gases or water. In a productive, medium-textured soil the total pore space is typically about 50% of the soil volume.[55] Pore size varies considerably; the smallest pores (cryptopores; <0.1 μm) hold water too tightly for use by plant roots; plant-available water is held in ultramicropores, micropores and mesopores (0.1–75 μm); and macropores (>75 μm) are generally air-filled when the soil is at field capacity.

Soil texture determines total volume of the smallest pores;[56] clay soils have smaller pores, but more total pore space than sands,[57] despite a much lower permeability.[58] Soil structure has a strong influence on the larger pores that affect soil aeration, water infiltration and drainage.[59] Tillage has the short-term benefit of temporarily increasing the number of pores of largest size, but these can be rapidly degraded by the destruction of soil aggregation.[60]

The pore size distribution affects the ability of plants and other organisms to access water and oxygen; large, continuous pores allow rapid transmission of air, water and dissolved nutrients through soil, and small pores store water between rainfall or irrigation events.[61] Pore size variation also compartmentalizes the soil pore space such that many microbial and faunal organisms are not in direct competition with one another, which may explain not only the large number of species present, but the fact that functionally redundant organisms (organisms with the same ecological niche) can co-exist within the same soil.[62]

Consistency

Consistency is the ability of soil to stick to itself or to other objects (cohesion and adhesion, respectively) and its ability to resist deformation and rupture. It is of approximate use in predicting cultivation problems[63] and the engineering of foundations.[64] Consistency is measured at three moisture conditions: air-dry, moist, and wet.[65] In those conditions the consistency quality depends upon the clay content. In the wet state, the two qualities of stickiness and plasticity are assessed. A soil's resistance to fragmentation and crumbling is assessed in the dry state by rubbing the sample. Its resistance to shearing forces is assessed in the moist state by thumb and finger pressure. Additionally, the cemented consistency depends on cementation by substances other than clay, such as calcium carbonate, silica, oxides and salts; moisture content has little effect on its assessment. The measures of consistency border on subjective compared to other measures such as pH, since they employ the apparent feel of the soil in those states.

The terms used to describe the soil consistency in three moisture states and a last not affected by the amount of moisture are as follows:

  1. Consistency of Dry Soil: loose, soft, slightly hard, hard, very hard, extremely hard
  2. Consistency of Moist Soil: loose, very friable, friable, firm, very firm, extremely firm
  3. Consistency of Wet Soil: nonsticky, slightly sticky, sticky, very sticky; nonplastic, slightly plastic, plastic, very plastic
  4. Consistency of Cemented Soil: weakly cemented, strongly cemented, indurated (requires hammer blows to break up)[66]

Soil consistency is useful in estimating the ability of soil to support buildings and roads. More precise measures of soil strength are often made prior to construction.[67]

Temperature

Further information: Soil thermal properties, Heat capacity, and Thermal conduction

Soil temperature depends on the ratio of the energy absorbed to that lost.[68] Soil has a mean annual temperature from -10 to 26 °C according to biomes.[69] Soil temperature regulates seed germination,[70] breaking of seed dormancy,[71][72] plant and root growth[73] and the availability of nutrients.[74] Soil temperature has important seasonal, monthly and daily variations, fluctuations in soil temperature being much lower with increasing soil depth.[75] Heavy mulching (a type of soil cover) can slow the warming of soil in summer, and, at the same time, reduce fluctuations in surface temperature.[76]

Most often, agricultural activities must adapt to soil temperatures by:

  1. maximizing germination and growth by timing of planting (also determined by photoperiod)[77]
  2. optimizing use of anhydrous ammonia by applying to soil below 10 °C (50 °F)[78]
  3. preventing heaving and thawing due to frosts from damaging shallow-rooted crops[79]
  4. preventing damage to desirable soil structure by freezing of saturated soils[80]
  5. improving uptake of phosphorus by plants[81]

Soil temperatures can be raised by drying soils[82] or the use of clear plastic mulches.[83] Organic mulches slow the warming of the soil.[76]

There are various factors that affect soil temperature, such as water content,[84] soil color,[85] and relief (slope, orientation, and elevation),[86] and soil cover (shading and insulation), in addition to air temperature.[87] The color of the ground cover and its insulating properties have a strong influence on soil temperature.[88] Whiter soil tends to have a higher albedo than blacker soil cover, which encourages whiter soils to have lower soil temperatures.[85] The specific heat of soil is the energy required to raise the temperature of soil by 1 °C. The specific heat of soil increases as water content increases, since the heat capacity of water is greater than that of dry soil.[89] The specific heat of pure water is ~ 1 calorie per gram, the specific heat of dry soil is ~ 0.2 calories per gram, hence, the specific heat of wet soil is ~ 0.2 to 1 calories per gram (0.8 to 4.2 kJ per kilogram).[90] Also, a tremendous energy (~584 cal/g or 2442 kJ/kg at 25 °C) is required to evaporate water (known as the heat of vaporization). As such, wet soil usually warms more slowly than dry soil – wet surface soil is typically 3 to 6 °C colder than dry surface soil.[91]

Soil heat flux refers to the rate at which heat energy moves through the soil in response to a temperature difference between two points in the soil. The heat flux density is the amount of energy that flows through soil per unit area per unit time and has both magnitude and direction. For the simple case of conduction into or out of the soil in the vertical direction, which is most often applicable the heat flux density is:

In SI units

is the heat flux density, in SI the units are W·m−2
is the soils' conductivity, W·m−1·K−1. The thermal conductivity is sometimes a constant, otherwise an average value of conductivity for the soil condition between the surface and the point at depth is used.
is the temperature difference (temperature gradient) between the two points in the soil between which the heat flux density is to be calculated. In SI the units are kelvin, K.
is the distance between the two points within the soil, at which the temperatures are measured and between which the heat flux density is being calculated. In SI the units are meters m, and where x is measured positive downward.

Heat flux is in the direction opposite the temperature gradient, hence the minus sign. That is to say, if the temperature of the surface is higher than at depth x, the negative sign will result in a positive value for the heat flux q, and which is interpreted as the heat being conducted into the soil.

Component Thermal Conductivity (W·m‐1·K‐1)
Quartz 8.8
Clay 2.9
Organic matter 0.25
Water 0.57
Ice 2.4
Air 0.025
Dry soil 0.2‐0.4
Wet soil 1–3

(Source[6])

Soil temperature is important for the survival and early growth of seedlings.[92] Soil temperatures affect the anatomical and morphological character of root systems.[93] All physical, chemical, and biological processes in soil and roots are affected in particular because of the increased viscosities of water and protoplasm at low temperatures.[94] In general, climates that do not preclude survival and growth of white spruce above ground are sufficiently benign to provide soil temperatures able to maintain white spruce root systems. In some northwestern parts of the range, white spruce occurs on permafrost sites[95] and although young unlignified roots of conifers may have little resistance to freezing,[96] the root system of containerized white spruce was not affected by exposure to a temperature of 5 to 20 °C.[97]

Optimum temperatures for tree root growth range between 10 °C and 25 °C in general[98] and for spruce in particular.[99] In 2-week-old white spruce seedlings that were then grown for 6 weeks in soil at temperatures of 15 °C, 19 °C, 23 °C, 27 °C, and 31 °C; shoot height, shoot dry weight, stem diameter, root penetration, root volume, and root dry weight all reached maxima at 19 °C.[100]

However, whereas strong positive relationships between soil temperature (5 °C to 25 °C) and growth have been found in trembling aspen and balsam poplar, white and other spruce species have shown little or no changes in growth with increasing soil temperature.[99][101][102][103][104] Such insensitivity to soil low temperature may be common among a number of western and boreal conifers.[105]

Soil temperatures are increasing worldwide under the influence of present-day global climate warming, with opposing views about expected effects on carbon capture and storage and feedback loops to climate change[106] Most threats are about permafrost thawing and attended effects on carbon destocking[107] and ecosystem collapse.[108]

Colour

Main article: Soil color

Soil colour is often the first impression one has when viewing soil. Striking colours and contrasting patterns are especially noticeable. The Red River of the South carries sediment eroded from extensive reddish soils like Port Silt Loam in Oklahoma. The Yellow River in China carries yellow sediment from eroding loess soils. Mollisols in the Great Plains of North America are darkened and enriched by organic matter. Podsols in boreal forests have highly contrasting layers due to acidity and leaching.

In general, color is determined by the organic matter content, drainage conditions, and degree of oxidation. Soil color, while easily discerned, has little use in predicting soil characteristics.[109] It is of use in distinguishing boundaries of horizons within a soil profile,[110] determining the origin of a soil's parent material,[111] as an indication of wetness and waterlogged conditions,[112] and as a qualitative means of measuring organic,[113] iron oxide[114] and clay contents of soils.[111] Color is recorded in the Munsell color system as for instance 10YR3/4 Dusky Red, with 10YR as hue, 3 as value and 4 as chroma. Munsell color dimensions (hue, value and chroma) can be averaged among samples and treated as quantitative parameters, displaying significant correlations with various soil[115] and vegetation properties.[116]

Soil color is primarily influenced by soil mineralogy. Many soil colours are due to various iron minerals.[114] The development and distribution of colour in a soil profile result from chemical and biological weathering, especially redox reactions.[112] As the primary minerals in soil parent material weather, the elements combine into new and colourful compounds. Iron forms secondary minerals of a yellow or red colour,[117] organic matter decomposes into black and brown humic compounds,[118] and manganese[119] and sulfur[120] can form black mineral deposits. These pigments can produce various colour patterns within a soil. Aerobic conditions produce uniform or gradual colour changes, while reducing environments (anaerobic) result in rapid colour flow with complex, mottled patterns and points of colour concentration.[121]

Resistivity

Main article: Soil resistivity

Soil resistivity is a measure of a soil's ability to retard the conduction of an electric current. The electrical resistivity of soil can affect the rate of corrosion of metallic structures in contact with the soil.[122] Higher moisture content or increased electrolyte concentration can lower resistivity and increase conductivity, thereby increasing the rate of corrosion.[123][124] Soil resistivity values typically range from about 1 to 100000 Ω·m, extreme values being for saline soils and dry soils overlaying crystalline rocks, respectively.[125]

See also

References

  1. ^ Gardner, Catriona M.K.; Laryea, Kofi Buna; Unger, Paul W. (1999). Soil physical constraints to plant growth and crop production (1st ed.). Rome, Italy: Food and Agriculture Organization of the United Nations. CiteSeerX 10.1.1.466.9332. Archived (PDF) from the original on 8 August 2017. Retrieved 1 May 2022.
  2. ^ Six, Johan; Paustian, Keith; Elliott, Edward T.; Combrink, Clay (2000). "Soil structure and organic matter. I. Distribution of aggregate-size classes and aggregate-associated carbon". Soil Science Society of America Journal. 64 (2): 681–89. Bibcode:2000SSASJ..64..681S. doi:10.2136/sssaj2000.642681x. Retrieved 1 May 2022.
  3. ^ Håkansson, Inge; Lipiec, Jerzy (2000). "A review of the usefulness of relative bulk density values in studies of soil structure and compaction" (PDF). Soil and Tillage Research. 53 (2): 71–85. Bibcode:2000STilR..53...71H. doi:10.1016/S0167-1987(99)00095-1. S2CID 30045538. Archived (PDF) from the original on 22 October 2017. Retrieved 1 May 2022.
  4. ^ Schwerdtfeger, William J. (1965). "Soil resistivity as related to underground corrosion and cathodic protection" (PDF). Journal of Research of the National Bureau of Standards. 69C (1): 71–77. doi:10.6028/jres.069c.012 (inactive 3 December 2024). Retrieved 1 May 2022.{{cite journal}}: CS1 maint: DOI inactive as of December 2024 (link)
  5. ^ Tamboli, Prabhakar Mahadeo (1961). The influence of bulk density and aggregate size on soil moisture retention. Ames, Iowa: Iowa State University. Retrieved 1 May 2022.
  6. ^ a b Brady, Nyle C. (1984). The nature and properties of soils (9th ed.). New York, New York: Collier Macmillan. ISBN 978-0-02-313340-4. Retrieved 8 May 2022.
  7. ^ Haynes, Richard J.; Naidu, Ravi (1998). "Influence of lime, fertilizer and manure applications on soil organic matter content and soil physical conditions: a review". Nutrient Cycling in Agroecosystems. 51 (2): 123–37. Bibcode:1998NCyAg..51..123H. doi:10.1023/A:1009738307837. S2CID 20113235. Retrieved 8 May 2022.
  8. ^ Silver, Whendee L.; Neff, Jason; McGroddy, Megan; Veldkamp, Ed; Keller, Michael; Cosme, Raimundo (2000). "Effects of soil texture on belowground carbon and nutrient storage in a lowland Amazonian forest ecosystem" (PDF). Ecosystems. 3 (2): 193–209. Bibcode:2000Ecosy...3..193S. doi:10.1007/s100210000019. S2CID 23835982. Retrieved 8 May 2022.
  9. ^ Jenny, Hans (1941). Factors of soil formation: a system of qunatitative pedology (PDF). New York: McGraw-Hill. Archived (PDF) from the original on 8 August 2017. Retrieved 8 May 2022.
  10. ^ Jackson, Marion L. (1957). "Frequency distribution of clay minerals in major great soil groups as related to the factors of soil formation". Clays and Clay Minerals. 6 (1): 133–43. Bibcode:1957CCM.....6..133J. doi:10.1346/CCMN.1957.0060111. Retrieved 8 May 2022.
  11. ^ a b Petersen, Lis Wollesen; Moldrup, Per; Jacobsen, Ole Hørbye; Rolston, Dennis E. (1996). "Relations between specific surface area and soil physical and chemical properties". Soil Science. 161 (1): 9–21. Bibcode:1996SoilS.161....9P. doi:10.1097/00010694-199601000-00003. Retrieved 8 May 2022.
  12. ^ Lewis, D. R. (1955). "Ion exchange reactions of clays". In Pask, Joseph A.; Turner, Mort D. (eds.). Clays and clay technology. San Francisco, California: State of California, Department of Natural Resources, Division of Mines. pp. 54–69. CiteSeerX 10.1.1.134.8733. Retrieved 8 May 2022.
  13. ^ Dexter, Anthony R. (2004). "Soil physical quality. I. Theory, effects of soil texture, density, and organic matter, and effects on root growth". Geoderma. 120 (3/4): 201–14. doi:10.1016/j.geoderma.2003.09.004. Retrieved 15 May 2022.
  14. ^ Bouyoucos, George J. (1935). "The clay ratio as a criterion of susceptibility of soils to erosion". Journal of the American Society of Agronomy. 27 (9): 738–41. Bibcode:1935AgrJ...27..738B. doi:10.2134/agronj1935.00021962002700090007x. Retrieved 15 May 2022.
  15. ^ Borrelli, Pasquale; Ballabio, Cristiano; Panagos, Panos; Montanarella, Luca (2014). "Wind erosion susceptibility of European soils". Geoderma. 232/234: 471–78. Bibcode:2014Geode.232..471B. doi:10.1016/j.geoderma.2014.06.008. Retrieved 22 May 2022.
  16. ^ Russell 1957, pp. 32–33.
  17. ^ Flemming 1957, p. 331.
  18. ^ "Calcareous sand" (PDF). Commonwealth Scientific and Industrial Research Organisation (CSIRO). Retrieved 15 May 2022.
  19. ^ Grim, Ralph E. (1953). Clay mineralogy (PDF). New York, New York: McGraw-Hill. Archived from the original (PDF) on 24 December 2017. Retrieved 24 December 2017.
  20. ^ Donahue, Miller & Shickluna 1977, p. 53.
  21. ^ Sillanpää, Mikko; Webber, L. R. (1961). "The effect of freezing-thawing and wetting-drying cycles on soil aggregation". Canadian Journal of Soil Science. 41 (2): 182–87. doi:10.4141/cjss61-024.
  22. ^ a b Oades, J. Malcolm (1993). "The role of biology in the formation, stabilization and degradation of soil structure" (PDF). Geoderma. 56 (1–4): 377–400. Bibcode:1993Geode..56..377O. doi:10.1016/0016-7061(93)90123-3. Retrieved 22 May 2022.
  23. ^ a b Bronick, Carol J.; Lal, Ratan (January 2005). "Soil structure and management: a review" (PDF). Geoderma. 124 (1/2): 3–22. Bibcode:2005Geode.124....3B. doi:10.1016/j.geoderma.2004.03.005. Retrieved 22 May 2022.
  24. ^ Lee, Kenneth Ernest; Foster, Ralph C. (2003). "Soil fauna and soil structure". Australian Journal of Soil Research. 29 (6): 745–75. doi:10.1071/SR9910745. Retrieved 22 May 2022.
  25. ^ Soil Science Division Staff (2017). "Soil structure". Soil Survey Manual (issued March 2017), USDA Handbook No. 18. Washington, DC: United States Department of Agriculture, Natural Researches Conservation Service, Soils. Archived from the original on 7 November 2017. Retrieved 22 May 2022.
  26. ^ Horn, Rainer; Taubner, Heidi; Wuttke, M.; Baumgartl, Thomas (1994). "Soil physical properties related to soil structure". Soil and Tillage Research. 30 (2–4): 187–216. Bibcode:1994STilR..30..187H. doi:10.1016/0167-1987(94)90005-1. Retrieved 22 May 2022.
  27. ^ Murray, Robert S.; Grant, Cameron D. (2007). "The impact of irrigation on soil structure" (PDF). Retrieved 11 November 2022.
  28. ^ Donahue, Miller & Shickluna 1977, pp. 55–56.
  29. ^ Dinka, Takele M.; Morgan, Cristine L.S.; McInnes, Kevin J.; Kishné, Andrea Sz.; Harmel, R. Daren (2013). "Shrink–swell behavior of soil across a Vertisol catena". Journal of Hydrology. 476: 352–59. Bibcode:2013JHyd..476..352D. doi:10.1016/j.jhydrol.2012.11.002. Retrieved 29 May 2022.
  30. ^ Morris, Peter H.; Graham, James; Williams, David J. (1992). "Cracking in drying soils". Canadian Geotechnical Journal. 29 (2): 263–77. doi:10.1139/t92-030. Retrieved 29 May 2022.
  31. ^ Robinson, Nicole; Harper, R.J.; Smettem, Keith Richard J. (2006). "Soil water depletion by Eucalyptus spp. integrated into dryland agricultural systems". Plant and Soil. 286 (1–2): 141–51. Bibcode:2006PlSoi.286..141R. doi:10.1007/s11104-006-9032-4. S2CID 44241416. Retrieved 29 May 2022.
  32. ^ Scholl, Peter; Leitner, Daniel; Kammerer, Gerhard; Loiskandl, Willibald; Kaul, Hans-Peter; Bodner, Gernot (2014). "Root induced changes of effective 1D hydraulic properties in a soil column". Plant and Soil. 381 (1/2): 193–213. Bibcode:2014PlSoi.381..193S. doi:10.1007/s11104-014-2121-x. PMC 4372835. PMID 25834290. Retrieved 29 May 2022.
  33. ^ Angers, Denis A.; Caron, Jean (1998). "Plant-induced changes in soil structure: processes and feedbacks". Biogeochemistry. 42 (1): 55–72. Bibcode:1998Biogc..42...55A. doi:10.1023/A:1005944025343. S2CID 94249645. Retrieved 29 May 2022.
  34. ^ White, Rosemary G.; Kirkegaard, John A. (2010). "The distribution and abundance of wheat roots in a dense, structured subsoil: implications for water uptake". Plant, Cell and Environment. 33 (2): 133–48. doi:10.1111/j.1365-3040.2009.02059.x. PMID 19895403. Retrieved 29 May 2022.
  35. ^ Skinner, Malcolm F.; Bowen, Glynn D. (1974). "The penetration of soil by mycelial strands of ectomycorrhizal fungi". Soil Biology and Biochemistry. 6 (1): 57–8. Bibcode:1974SBiBi...6IN359S. doi:10.1016/0038-0717(74)90012-1. Retrieved 29 May 2022.
  36. ^ Chenu, Claire (1993). "Clay- or sand-polysaccharide associations as models for the interface between micro-organisms and soil: water related properties and microstructure". Geoderma. 56 (1–4): 143–56. Bibcode:1993Geode..56..143C. doi:10.1016/0016-7061(93)90106-U. Retrieved 29 May 2022.
  37. ^ Franzluebbers, Alan J. (2002). "Water infiltration and soil structure related to organic matter and its stratification with depth". Soil and Tillage Research. 66 (2): 197–205. Bibcode:2002STilR..66..197F. doi:10.1016/S0167-1987(02)00027-2. Retrieved 29 May 2022.
  38. ^ Sposito, Garrison; Skipper, Neal T.; Sutton, Rebecca; Park, Sung-Ho; Soper, Alan K.; Greathouse, Jeffery A. (1999). "Surface geochemistry of the clay minerals". Proceedings of the National Academy of Sciences of the United States of America. 96 (7): 3358–64. Bibcode:1999PNAS...96.3358S. doi:10.1073/pnas.96.7.3358. PMC 34275. PMID 10097044.
  39. ^ Tombácz, Etelka; Szekeres, Márta (2006). "Surface charge heterogeneity of kaolinite in aqueous suspension in comparison with montmorillonite". Applied Clay Science. 34 (1–4): 105–24. Bibcode:2006ApCS...34..105T. doi:10.1016/j.clay.2006.05.009. Retrieved 29 May 2022.
  40. ^ Schofield, R. Kenworthy; Samson, H.R. (1953). "The deflocculation of kaolinite suspensions and the accompanying change-over from positive to negative chloride adsorption" (PDF). Clay Minerals Bulletin. 2 (9): 45–51. Bibcode:1953ClMin...2...45S. doi:10.1180/claymin.1953.002.9.08 (inactive 2 December 2024). Retrieved 29 May 2022.{{cite journal}}: CS1 maint: DOI inactive as of December 2024 (link)
  41. ^ Shainberg, Isaac; Letey, John (1984). "Response of soils to sodic and saline conditions". Hilgardia. 52 (2): 1–57. doi:10.3733/hilg.v52n02p057. Archived from the original on 11 December 2017. Retrieved 29 May 2022.
  42. ^ Young, Michael H.; McDonald, Eric V.; Caldwell, Todd G.; Benner, Shawn G.; Meadows, Darren G. (2004). "Hydraulic properties of a desert soil chronosequence in the Mojave Desert, USA" (PDF). Vadose Zone Journal. 3 (3): 956–63. Bibcode:2004VZJ.....3..956Y. doi:10.2113/3.3.956. S2CID 51769309. Archived from the original (PDF) on 16 June 2018. Retrieved 29 May 2022.
  43. ^ Donahue, Miller & Shickluna 1977, p. 60.
  44. ^ Yu, Charley; Kamboj, Sunita; Wang, Cheng; Cheng, Jing-Jy (2015). "Data collection handbook to support modeling impacts of radioactive material in soil and building structures" (PDF). Argonne National Laboratory. pp. 13–21. Archived (PDF) from the original on 2018-08-04. Retrieved 5 June 2022.
  45. ^ Blanco-Canqui, Humberto; Lal, Rattan; Post, Wilfred M.; Izaurralde, Roberto Cesar; Shipitalo, Martin J. (2006). "Organic carbon influences on soil particle density and rheological properties". Soil Science Society of America Journal. 70 (4): 1407–14. Bibcode:2006SSASJ..70.1407B. doi:10.2136/sssaj2005.0355. Retrieved 5 June 2022.
  46. ^ Cornell, Rochelle M.; Schwertmann, Udo (2003). The iron oxides: structure, properties, reactions, occurrences and uses (PDF) (2nd ed.). Weinheim, Germany: Wiley-VCH. Archived (PDF) from the original on 26 December 2017. Retrieved 5 June 2022.
  47. ^ Håkansson, Inge; Lipiec, Jerzy (2000). "A review of the usefulness of relative bulk density values in studies of soil structure and compaction" (PDF). Soil and Tillage Research. 53 (2): 71–85. Bibcode:2000STilR..53...71H. doi:10.1016/S0167-1987(99)00095-1. S2CID 30045538. Archived (PDF) from the original on 22 October 2017. Retrieved 5 June 2022.
  48. ^ Donahue, Miller & Shickluna 1977, pp. 59–61.
  49. ^ Mäder, Paul; Fließbach, Andreas; Dubois, David; Gunst, Lucie; Fried, Padruot; Liggli, Urs (2002). "Soil fertility and biodiversity in organic farming" (PDF). Science. 296 (1694): 1694–97. Bibcode:2002Sci...296.1694M. doi:10.1126/science.1071148. PMID 12040197. S2CID 7635563. Retrieved 5 June 2022.
  50. ^ Blanchart, Éric; Albrecht, Alain; Alegre, Julio; Duboisset, Arnaud; Gilot, Cécile; Pashanasi, Beto; Lavelle, Patrick; Brussaard, Lijbert (1999). "Effects of earthworms on soil structure and physical properties" (PDF). In Lavelle, Patrick; Brussaard, Lijbert; Hendrix, Paul F. (eds.). Earthworm management in tropical agroecosystems (1st ed.). Wallingford, UK: CAB International. pp. 149–72. ISBN 978-0-85199-270-9. Retrieved 5 June 2022.
  51. ^ Rampazzo, Nicola; Blum, Winfried E.H.; Wimmer, Bernhard (1998). "Assessment of soil structure parameters and functions in agricultural soils" (PDF). Die Bodenkultur. 49 (2): 69–84. Retrieved 5 June 2022.
  52. ^ Bodman, Geoffrey Baldwin; Constantin, Winfried G.K. (1965). "Influence of particle size distribution in soil compaction" (PDF). Hilgardia. 36 (15): 567–91. doi:10.3733/hilg.v36n15p567. Retrieved 5 June 2022.
  53. ^ Zeng, Y.; Gantzer, Clark; Payton, R.L.; Anderson, Stephen H. (1996). "Fractal dimension and lacunarity of bulk density determined with X-ray computed tomography". Soil Science Society of America Journal. 60 (6): 1718–24. Bibcode:1996SSASJ..60.1718Z. doi:10.2136/sssaj1996.03615995006000060016x. Retrieved 5 June 2022.
  54. ^ Rawls, Walter J.; Brakensiek, Donald L.; Saxton, Keith E. (1982). "Estimation of soil water properties". Transactions of the American Society of Agricultural Engineers. 25 (5): 1316–20. doi:10.13031/2013.33720. Archived (PDF) from the original on 17 May 2017. Retrieved 5 June 2022.
  55. ^ "Physical aspects of crop productivity". www.fao.org. Rome, Italy: Food and Agriculture Organization of the United Nations. Retrieved 5 June 2022.
  56. ^ Rutherford, P. Michael; Juma, Noorallah G. (1992). "Influence of texture on habitable pore space and bacterial-protozoan populations in soil". Biology and Fertility of Soils. 12 (4): 221–27. Bibcode:1992BioFS..12..221R. doi:10.1007/BF00336036. S2CID 21083298. Retrieved 5 June 2022.
  57. ^ Diamond, Sidney (1970). "Pore size distributions in clays". Clays and Clay Minerals. 18 (1): 7–23. Bibcode:1970CCM....18....7D. doi:10.1346/CCMN.1970.0180103. S2CID 59017708. Retrieved 5 June 2022.
  58. ^ "Permeability of different soils". nptel.ac.in. Chennai, India: NPTEL, Government of India. Archived from the original on 2 January 2018. Retrieved 1 January 2018.
  59. ^ Donahue, Miller & Shickluna 1977, pp. 62–63.
  60. ^ "Physical properties of soil and soil water". passel.unl.edu. Lincoln, Nebraska: Plant and Soil Sciences eLibrary. Retrieved 5 June 2022.
  61. ^ Nimmo, John R. (2004). "Porosity and pore size distribution" (PDF). In Hillel, Daniel; Rosenzweig, Cynthia; Powlson, David; Scow, Kate; Singer, Michail; Sparks, Donald (eds.). Encyclopedia of soils in the environment, volume 3 (1st ed.). London, United Kingdom: Academic Press. pp. 295–303. ISBN 978-0-12-348530-4. Retrieved 5 June 2022.
  62. ^ Giller, Paul S. (1996). "The diversity of soil communities, the 'poor man's tropical rainforest'". Biodiversity and Conservation. 5 (2): 135–68. Bibcode:1996BiCon...5..135G. doi:10.1007/BF00055827. S2CID 206767237. Retrieved 5 June 2022.
  63. ^ Boekel, P.; Peerlkamp, Petrus K. (1956). "Soil consistency as a factor determining the soil structure of clay soils". Netherlands Journal of Agricultural Science. 4 (1): 122–25. doi:10.18174/njas.v4i1.17792. S2CID 91853219. Retrieved 12 June 2022.
  64. ^ Day, Robert W. (2000). "Soil mechanics and foundations" (PDF). In Merritt, Frederick S.; Rickett, Jonathan T. (eds.). Building design and construction handbook (6th ed.). New York: McGraw-Hill Professional. ISBN 978-0-07-041999-5. Retrieved 12 June 2022.
  65. ^ "Soil consistency". Rome, Italy: Food and Agriculture Organization of the United Nations. Retrieved 12 June 2022.
  66. ^ Donahue, Miller & Shickluna 1977, pp. 62–63, 565–67.
  67. ^ Sharma, Sparsh; Ahmed, Suhaib; Naseem, Mohd; Alnumay, Waleed S.; Singh, Saurabh; Cho, Gi Hwan (2021). "A survey on applications of artificial intelligence for pre-parametric project cost and soil shear-strength estimation in construction and geotechnical engineering". Sensors. 21 (463): 463. Bibcode:2021Senso..21..463S. doi:10.3390/s21020463. PMC 7827696. PMID 33440731. Retrieved 24 June 2022.
  68. ^ Deardorff, James W. (1978). "Efficient prediction of ground surface temperature and moisture, with inclusion of a layer of vegetation" (PDF). Journal of Geophysical Research. 83 (C4): 1889–903. Bibcode:1978JGR....83.1889D. CiteSeerX 10.1.1.466.5266. doi:10.1029/JC083iC04p01889. Retrieved 12 June 2022.
  69. ^ Hursh, Andrew; Ballantyne, Ashley; Cooper, Leila; Maneta, Marco; Kimball, John; Watts, Jennifer (2017). "The sensitivity of soil respiration to soil temperature, moisture, and carbon supply at the global scale". Global Change Biology. 23 (5): 2090–103. Bibcode:2017GCBio..23.2090H. doi:10.1111/gcb.13489. PMID 27594213. S2CID 25638073. Archived (PDF) from the original on 29 January 2018. Retrieved 12 June 2022.
  70. ^ Forcella, Frank; Benech Arnold, Roberto L.; Sanchez, Rudolfo; Ghersa, Claudio M. (2000). "Modeling seedling emergence". Field Crops Research. 67 (2): 123–39. Bibcode:2000FCrRe..67..123F. doi:10.1016/S0378-4290(00)00088-5. Retrieved 19 June 2022.
  71. ^ Benech-Arnold, Roberto L.; Sánchez, Rodolfo A.; Forcella, Frank; Kruk, Betina C.; Ghersa, Claudio M. (2000). "Environmental control of dormancy in weed seed banks in soil". Field Crops Research. 67 (2): 105–22. Bibcode:2000FCrRe..67..105B. doi:10.1016/S0378-4290(00)00087-3. Retrieved 19 June 2022.
  72. ^ Herranz, José M.; Ferrandis, Pablo; Martínez-Sánchez, Juan J. (1998). "Influence of heat on seed germination of seven Mediterranean Leguminosae species". Plant Ecology. 136 (1): 95–103. Bibcode:1998PlEco.136...95H. doi:10.1023/A:1009702318641. S2CID 1145738. Retrieved 19 June 2022.
  73. ^ McMichael, Bobbie L.; Burke, John J. (1998). "Soil temperature and root growth". HortScience. 33 (6): 947–51. doi:10.21273/HORTSCI.33.6.947. Archived (PDF) from the original on 12 July 2018. Retrieved 19 June 2022.
  74. ^ Tindall, James A.; Mills, Harry A.; Radcliffe, David E. (1990). "The effect of root zone temperature on nutrient uptake of tomato". Journal of Plant Nutrition. 13 (8): 939–56. Bibcode:1990JPlaN..13..939T. doi:10.1080/01904169009364127. Retrieved 19 June 2022.
  75. ^ "Soil temperatures". Exeter, United Kingdom: Met Office. Retrieved 19 June 2022.
  76. ^ a b Lal, Ratan (1974). "Soil temperature, soil moisture and maize yield from mulched and unmulched tropical soils". Plant and Soil. 40 (1): 129–43. Bibcode:1974PlSoi..40..129L. doi:10.1007/BF00011415. S2CID 44721938. Retrieved 19 June 2022.
  77. ^ Ritchie, Joe T.; NeSmith, D. Scott (1991). "Temperature and crop development". In Hanks, John; Ritchie, Joe T. (eds.). Modeling plant and soil systems (1st ed.). Madison, Wisconsin: American Society of Agronomy. pp. 5–29. ISBN 978-0-89118-106-4. Retrieved 19 June 2022.
  78. ^ Vetsch, Jeffrey A.; Randall, Gyles W. (2004). "Corn production as affected by nitrogen application timing and tillage" (PDF). Agronomy Journal. 96 (2): 502–09. Bibcode:2004AgrJ...96..502V. doi:10.2134/agronj2004.5020. Retrieved 19 June 2022.
  79. ^ Holmes, R.M.; Robertson, G.W. (1960). "Soil heaving in alfalfa plots in relation to soil and air temperature". Canadian Journal of Soil Science. 40 (2): 212–18. doi:10.4141/cjss60-027. Retrieved 19 June 2022.
  80. ^ Dagesse, Daryl F. (2013). "Freezing cycle effects on water stability of soil aggregates". Canadian Journal of Soil Science. 93 (4): 473–83. doi:10.4141/cjss2012-046. Retrieved 26 June 2022.
  81. ^ Dormaar, Johan F.; Ketcheson, John W. (1960). "The effect of nitrogen form and soil temperature on the growth and phosphorus uptake of corn plants grown in the greenhouse". Canadian Journal of Soil Science. 40 (2): 177–84. doi:10.4141/cjss60-023. Retrieved 26 June 2022.
  82. ^ Fuchs, Marcel; Tanner, Champ B. (1967). "Evaporation from a drying soil". Journal of Applied Meteorology. 6 (5): 852–57. Bibcode:1967JApMe...6..852F. doi:10.1175/1520-0450(1967)006<0852:EFADS>2.0.CO;2. Retrieved 26 June 2022.
  83. ^ Waggoner, Paul E.; Miller, Patrick M.; De Roo, Henry C. (1960). "Plastic mulching: principles and benefits". Bulletin of the Connecticut Agricultural Experiment Station. 634: 1–44. Retrieved 26 June 2022.
  84. ^ Beadle, Noel C.W. (1940). "Soil temperatures during forest fires and their effect on the survival of vegetation" (PDF). Journal of Ecology. 28 (1): 180–92. Bibcode:1940JEcol..28..180B. doi:10.2307/2256168. JSTOR 2256168. Retrieved 26 June 2022.
  85. ^ a b Post, Donald F.; Fimbres, Adan; Matthias, Allan D.; Sano, Edson E.; Accioly, Luciano; Batchily, A. Karim; Ferreira, Laerte G. (2000). "Predicting soil albedo from soil color and spectral reflectance data". Soil Science Society of America Journal. 64 (3): 1027–34. Bibcode:2000SSASJ..64.1027P. doi:10.2136/sssaj2000.6431027x. Retrieved 26 June 2022.
  86. ^ Macyk, T.M.; Pawluk, S.; Lindsay, J.D. (1978). "Relief and microclimate as related to soil properties". Canadian Journal of Soil Science. 58 (3): 421–38. doi:10.4141/cjss78-049. Retrieved 26 June 2022.
  87. ^ Zheng, Daolan; Hunt Jr, E. Raymond; Running, Steven W. (1993). "A daily soil temperature model based on air temperature and precipitation for continental applications". Climate Research. 2 (3): 183–91. Bibcode:1993ClRes...2..183Z. doi:10.3354/cr002183. Retrieved 26 June 2022.
  88. ^ Kang, Sinkyu; Kim, S.; Oh, S.; Lee, Dowon (2000). "Predicting spatial and temporal patterns of soil temperature based on topography, surface cover and air temperature". Forest Ecology and Management. 136 (1–3): 173–84. Bibcode:2000ForEM.136..173K. doi:10.1016/S0378-1127(99)00290-X. Retrieved 26 June 2022.
  89. ^ Bristow, Keith L. (1998). "Measurement of thermal properties and water content of unsaturated sandy soil using dual-probe heat-pulse probes". Agricultural and Forest Meteorology. 89 (2): 75–84. Bibcode:1998AgFM...89...75B. doi:10.1016/S0168-1923(97)00065-8. Retrieved 26 June 2022.
  90. ^ Abu-Hamdeh, Nidal H. (2003). "Thermal properties of soils as affected by density and water content". Biosystems Engineering. 86 (1): 97–102. Bibcode:2003BiSyE..86...97A. doi:10.1016/S1537-5110(03)00112-0. Retrieved 26 June 2022.
  91. ^ Beadle, N.C.W. (1940). "Soil temperatures during forest fires and their effect on the survival of vegetation" (PDF). Journal of Ecology. 28 (1): 180–92. Bibcode:1940JEcol..28..180B. doi:10.2307/2256168. JSTOR 2256168. Retrieved 26 June 2022.
  92. ^ Barney, Charles W. (1951). "Effects of soil temperature and light intensity on root growth of loblolly pine seedlings". Plant Physiology. 26 (1): 146–63. doi:10.1104/pp.26.1.146. PMC 437627. PMID 16654344. Retrieved 3 July 2022.
  93. ^ Equiza, Maria A.; Miravé, Juan P.; Tognetti, Jorge A. (2001). "Morphological, anatomical and physiological responses related to differential shoot vs. root growth inhibition at low temperature in spring and winter wheat". Annals of Botany. 87 (1): 67–76. doi:10.1006/anbo.2000.1301. Retrieved 3 July 2022.
  94. ^ Babalola, Olubukola; Boersma, Larry; Youngberg, Chester T. (1968). "Photosynthesis and transpiration of Monterey pine seedlings as a function of soil water suction and soil temperature" (PDF). Plant Physiology. 43 (4): 515–21. doi:10.1104/pp.43.4.515. PMC 1086880. PMID 16656800. Retrieved 3 July 2022.
  95. ^ Gill, Don (1975). "Influence of white spruce trees on permafrost-table microtopography, Mackenzie River Delta". Canadian Journal of Earth Sciences. 12 (2): 263–72. Bibcode:1975CaJES..12..263G. doi:10.1139/e75-023. Retrieved 3 July 2022.
  96. ^ Coleman, Mark D.; Hinckley, Thomas M.; McNaughton, Geoffrey; Smit, Barbara A. (1992). "Root cold hardiness and native distribution of subalpine conifers". Canadian Journal of Forest Research. 22 (7): 932–38. doi:10.1139/x92-124. Retrieved 3 July 2022.
  97. ^ Binder, Wolfgang D.; Fielder, Peter (1995). "Heat damage in boxed white spruce (Picea glauca [Moench.] Voss) seedlings: its pre-planting detection and effect on field performance". New Forests. 9 (3): 237–59. Bibcode:1995NewFo...9..237B. doi:10.1007/BF00035490. S2CID 6638289. Retrieved 3 July 2022.
  98. ^ McMichael, Bobby L.; Burke, John J. (1998). "Soil temperature and root growth". HortScience. 33 (6): 947–51. doi:10.21273/HORTSCI.33.6.947. Archived (PDF) from the original on 12 July 2018. Retrieved 10 July 2022.
  99. ^ a b Landhäusser, Simon M.; DesRochers, Annie; Lieffers, Victor J. (2001). "A comparison of growth and physiology in Picea glauca and Populus tremuloides at different soil temperatures". Canadian Journal of Forest Research. 31 (11): 1922–29. doi:10.1139/x01-129. Retrieved 10 July 2022.
  100. ^ Heninger, Ronald L.; White, D.P. (1974). "Tree seedling growth at different soil temperatures". Forest Science. 20 (4): 363–67. doi:10.1093/forestscience/20.4.363 (inactive 1 November 2024).{{cite journal}}: CS1 maint: DOI inactive as of November 2024 (link)
  101. ^ Tryon, Peter R.; Chapin, F. Stuart III (1983). "Temperature control over root growth and root biomass in taiga forest trees". Canadian Journal of Forest Research. 13 (5): 827–33. doi:10.1139/x83-112. Retrieved 10 July 2022.
  102. ^ Landhäusser, Simon M.; Silins, Uldis; Lieffers, Victor J.; Liu, Wei (2003). "Response of Populus tremuloides, Populus balsamifera, Betula papyrifera and Picea glauca seedlings to low soil temperature and water-logged soil conditions". Scandinavian Journal of Forest Research. 18 (5): 391–400. Bibcode:2003SJFR...18..391L. doi:10.1080/02827580310015044. S2CID 85973742. Retrieved 10 July 2022.
  103. ^ Turner, N.C.; Jarvis, Paul G. (1975). "Photosynthesis in Sitka spruce (Picea sitchensis (Bong.) Carr. IV. Response to soil temperature". Journal of Applied Ecology. 12 (2): 561–76. Bibcode:1975JApEc..12..561T. doi:10.2307/2402174. JSTOR 2402174. Retrieved 10 July 2022.
  104. ^ Day, Tolly A.; DeLucia, Evan H.; Smith, William K. (1990). "Effect of soil temperature on stem flow, shoot gas exchange and water potential of Picea engelmannii (Parry) during snowmelt". Oecologia. 84 (4): 474–81. Bibcode:1990Oecol..84..474D. doi:10.1007/bf00328163. JSTOR 4219453. PMID 28312963. S2CID 2181646. Retrieved 10 July 2022.
  105. ^ Green, D. Scott (2004). "Describing condition-specific determinants of competition in boreal and sub-boreal mixedwood stands". Forestry Chronicle. 80 (6): 736–42. doi:10.5558/tfc80736-6. Retrieved 10 July 2022.
  106. ^ Davidson, Eric A.; Janssens, Ivan A. (2006). "Temperature sensitivity of soil carbon decomposition and feedbacks to climate change" (PDF). Nature. 440 (7081): 165–73. Bibcode:2006Natur.440..165D. doi:10.1038/nature04514. PMID 16525463. S2CID 4404915. Archived (PDF) from the original on 9 April 2018. Retrieved 17 July 2022.
  107. ^ Schaefer, Kevin; Zhang, Tingjun; Bruhwiler, Lori; Barrett, Andrew P. (2011). "Amount and timing of permafrost carbon release in response to climate warming". Tellus B. 63 (2): 165–80. Bibcode:2011TellB..63..165S. doi:10.1111/j.1600-0889.2011.00527.x. Retrieved 17 July 2022.
  108. ^ Jorgenson, M. Torre; Racine, Charles H.; Walters, James C.; Osterkamp, Thomas E. (2001). "Permafrost degradation and ecological changes associated with a warming climate in Central Alaska". Climatic Change. 48 (4): 551–79. Bibcode:2001ClCh...48..551J. CiteSeerX 10.1.1.420.5083. doi:10.1023/A:1005667424292. S2CID 18135860. Retrieved 17 July 2022.
  109. ^ Donahue, Miller & Shickluna 1977, p. 71.
  110. ^ "Soil color never lies". European Geosciences Union. Retrieved 17 July 2022.
  111. ^ a b Viscarra Rossel, Raphael A.; Cattle, Stephen R.; Ortega, A.; Fouad, Youssef (2009). "In situ measurements of soil colour, mineral composition and clay content by vis–NIR spectroscopy". Geoderma. 150 (3–4): 253–66. Bibcode:2009Geode.150..253V. CiteSeerX 10.1.1.462.5659. doi:10.1016/j.geoderma.2009.01.025. Retrieved 17 July 2022.
  112. ^ a b Blavet, Didier; Mathe, E.; Leprun, Jean-Claude (2000). "Relations between soil colour and waterlogging duration in a representative hillside of the West African granito-gneissic bedrock". Catena. 39 (3): 187–210. Bibcode:2000Caten..39..187B. doi:10.1016/S0341-8162(99)00087-9. Retrieved 17 July 2022.
  113. ^ Shields, J.A.; Paul, Eldor A.; St. Arnaud, Roland J.; Head, W.K. (1968). "Spectrophotometric measurement of soil color and its relationship to moisture and organic matter". Canadian Journal of Soil Science. 48 (3): 271–80. doi:10.4141/cjss68-037. hdl:10217/81101. Retrieved 17 July 2022.
  114. ^ a b Barrón, Vidal; Torrent, José (1986). "Use of the Kubelka-Munk theory to study the influence of iron oxides on soil colour" (PDF). Journal of Soil Science. 37 (4): 499–510. doi:10.1111/j.1365-2389.1986.tb00382.x. Retrieved 17 July 2022.
  115. ^ Ponge, Jean-François; Chevalier, Richard; Loussot, Philippe (2002). "Humus Index: an integrated tool for the assessment of forest floor and topsoil properties". Soil Science Society of America Journal. 66 (6): 1996–2001. Bibcode:2002SSASJ..66.1996P. doi:10.2136/sssaj2002.1996. S2CID 92303060. Retrieved 17 July 2022.
  116. ^ Maurel, Noelie; Salmon, Sandrine; Ponge, Jean-François; Machon, Nathalie; Moret, Jacques; Muratet, Audrey (2010). "Does the invasive species Reynoutria japonica have an impact on soil and flora in urban wastelands?". Biological Invasions. 12 (6): 1709–19. Bibcode:2010BiInv..12.1709M. doi:10.1007/s10530-009-9583-4. S2CID 2936621. Retrieved 17 July 2022.
  117. ^ Davey, Bryan G.; Russell, James D.; Wilson, M. Jeff (1975). "Iron oxide and clay minerals and their relation to colours of red and yellow podzolic soils near Sydney, Australia". Geoderma. 14 (2): 125–38. Bibcode:1975Geode..14..125D. doi:10.1016/0016-7061(75)90071-3. Retrieved 24 July 2022.
  118. ^ Anderson, Darwin W. (1979). "Processes of humus formation and transformation in soils of the Canadian Great Plains". Journal of Soil Science. 30 (1): 77–84. doi:10.1111/j.1365-2389.1979.tb00966.x. Retrieved 24 July 2022.
  119. ^ Vodyanitskii, Yury N.; Vasil'ev, A.A.; Lessovaia, Sofia N.; Sataev, E.F.; Sivtsov, Anatolii V. (2004). "Formation of manganese oxides in soils". Eurasian Soil Science. 37 (6): 572–84. Retrieved 24 July 2022.
  120. ^ Fanning, D.S.; Rabenhorst, M.C.; Bigham, J.M. (1993). "Colors of acid sulfate soils". In Bigham, J.M.; Ciolkosz, E.J. (eds.). Soil color (1st ed.). Fitchburg, Wisconsin: Soil Science Society of America. pp. 91–108. ISBN 978-0-89118-926-8. Retrieved 24 July 2022.
  121. ^ "The color of soil". United States Department of Agriculture – Natural Resources Conservation Service. Retrieved 24 July 2022.
  122. ^ Cole, I.S.; Marney, D. (2012). "The science of pipe corrosion: a review of the literature on the corrosion of ferrous metals in soils". Corrosion Science. 56: 5–16. Bibcode:2012Corro..56....5C. doi:10.1016/j.corsci.2011.12.001. Retrieved 24 July 2022.
  123. ^ Noor, Ehteram A.; Al-Moubaraki, Aisha (2014). "Influence of soil moisture content on the corrosion behavior of X60 steel in different soils". Arabian Journal for Science and Engineering. 39 (7): 5421–35. doi:10.1007/s13369-014-1135-2. S2CID 137468323. Retrieved 31 July 2022.
  124. ^ Amrheln, Christopher; Strong, James E.; Mosher, Paul A. (1992). "Effect of deicing salts on metal and organic matter mobility in roadside soils". Environmental Science and Technology. 26 (4): 703–09. Bibcode:1992EnST...26..703A. doi:10.1021/es00028a006. Retrieved 31 July 2022.
  125. ^ Samouëlian, Anatja; Cousin, Isabelle; Tabbagh, Alain; Bruand, Ary; Richard, Guy (2005). "Electrical resistivity survey in soil science: a review". Soil and Tillage Research. 83 (2): 173–93. Bibcode:2005STilR..83..173S. CiteSeerX 10.1.1.530.686. doi:10.1016/j.still.2004.10.004. S2CID 53615967. Retrieved 31 July 2022.

Bibliography

Quelle: https://en.wikipedia.org/wiki/Physical_properties_of_soil