Langbahn Team – Weltmeisterschaft

History of the steel industry (1970–present)

The global steel industry has been going through major changes since 1970. China has emerged as a major producer and consumer, as has India to a lesser extent. Consolidation has been rapid in Europe. According to the 2019 International Energy Agency (IEA) report, the iron and steel industry directly contributed 2.6 Gt to global CO2 emissions and accounted for 7% of global energy demand.[1] Singapore is the world's main trading hub for iron,[2] with about 90% of the world's iron ore derivatives traded on their stock exchange.[3]

Growth of the industry

Global steel production grew enormously in the 20th century from a mere 28 million tonnes at the beginning of the century to 781 million tons at the end.[4] Per-capita steel consumption in the US peaked in 1977, then fell by half before staging a modest recovery to levels well below the peak.[5]

World steel production in the 20th century

Bethlehem Steel in Bethlehem, Pennsylvania (closed in 2003) was one of the world's largest manufacturers of steel.

Production of crude steel has risen at an astounding rate, reaching 1.691 billion tonnes by 2017

During the 20th century, the consumption of steel increased at an average annual rate of 3.3%. In 1900, the United States was producing 37% of the world's steel, but with post war industrial development in Asia and centralised investment by China, by 2017 China alone accounted for 50%, with Europe (including the former Soviet Union) down to 24% and North America down to 6%.

For details of country-wise steel production see steel production by country.

Growth potential of the industry

Amongst the other newly steel-producing countries, in 2017 South Korea produces 71 million tonnes, nearly double Germany; and Brazil 34 million tonnes; all three countries have not changed much since 2011. Indian steel production in 2017 is just over 100 million tonnes; up substantially from 70 million tonnes in 2011 – compared to only 1 million tonnes at the time of its independence in 1947. By 1991, when the economy was opened up steel production grew to around 14 million tonnes. Thereafter, it doubled in the next 10 years, and then it is doubling again, maybe over a slightly longer span.

The world steel industry flattened from 2007 to 2009 at 1,300 million tonnes, before rising again, due to worldwide recession starting in 2008, with its heavy cutbacks in construction, sharply lowered demand and prices falling 40%. Showing the impact of that plateau, in 2007 ThyssenKrupp spent $12 billion to build the two most modern mills in the world, situated in Alabama and Brazil. They lost $11 billion on the new plants, which sold steel below the cost of production.[clarification needed] Finally in 2013, the plants were sold at under $4 billion.

Nowadays, the steel industry is on the edge of a major technological evolution to deal with the huge amounts of CO2 produced in the conventional steelmaking process. The use of blast furnaces and basic oxygen furnace produces around 1.8 ton of CO2 per ton of steel produced.[6] In order to reach the climate objectives as stated in the Paris Climate Agreement, the European Green Deal, etc., the steel industry will have to implement carbon capture and sequestration or carbon capture and utilization technology or change to less conventional steelmaking technologies such as the electric arc furnace route. Other alternatives are the use of biomass, plastic waste or hydrogen as reducing agent in the blast furnace instead of coal.

Reduction in workforce

A modern steel plant employs very few people per tonne, compared to the past. In South Korea, Posco employs 29,648 people to produce 28 million tonnes.

During the period 1974 to 1999, the steel industry had drastically reduced employment all around the world. In the US, it was down from 521,000 to 153,000. In Japan, from 459,000 to 208,000; Germany from 232,000 to 78,000; UK from 197,000 to 31,000; Brazil from 118,000 to 59,000; South Africa from 100,000 to 54,000. South Korea already had a low figure. It was only 58,000 in 1999. The steel industry had reduced its employment around the world by more than 1,500,000 in 25 years. [citation needed]

See also

References

Appendices

Both appendices are from IISI material, earlier on the web but now replaced by more recent data.

  1. ^ "Direct CO2 emissions in the iron and steel sector by scenario, 2019-2050 – Charts – Data & Statistics". IEA. Retrieved 23 November 2021.
  2. ^ "How Singapore became the world's main trading hub in just 10 years". Standard & Poor's (S&P) Global Commodities Insight. 27 June 2018.
  3. ^ Sainsbury, Michael (9 June 2014). "Singapore emerges as unlikely magnet for iron ore industry". Nikkei Asia.
  4. ^ Appendix 1
  5. ^ Smil, Vaclav (2006). Transforming the Twentieth Century: Technical Innovations and Their Consequences. Oxford, New York: Oxford University Press.
  6. ^ De Ras, Kevin; Van de Vijver, Ruben; Galvita, Vladimir V; Marin, Guy B; Van Geem, Kevin M (1 December 2019). "Carbon capture and utilization in the steel industry: challenges and opportunities for chemical engineering". Current Opinion in Chemical Engineering. Energy, Environment & Sustainability: Sustainability Modeling ● Reaction engineering and catalysis: Green Reaction Engineering. 26: 81–87. doi:10.1016/j.coche.2019.09.001. hdl:1854/LU-8635595. ISSN 2211-3398. S2CID 210619173.

Further reading

  • Bagchi, Jayanta. Development of Steel Industry in India (2005)
  • Ball, Jeffrey A. U.S. Manufacturing Dogfights: China's Steel and Foreign Aircraft Competition (2011)
  • D'Costa, Anthony P. The Global Restructuring of the Steel Industry: Innovations, Institutions, and Industrial Change London: Routledge, 1999 online version
  • Etienne, Gilbert. Asian Crucible: The Steel Industry in China and India (1992) *Hasegawa, Harukiyu. The Steel Industry in Japan: A Comparison with Britain 1996 online version[permanent dead link]
  • Hoerr, John P. And the Wolf Finally Came: The Decline of the American Steel Industry (1988) excerpt and text search
  • Hogan, Thomas. The Steel Industry of China: Its Present Status and Future Potential (1999)
  • Hogan, William T. Minimills and Integrated Mills: A Comparison of Steelmaking in the United States (1987)
  • Meny, Yves. Politics of Steel: Western Europe and the Steel Industry in the Crisis Years (1974–1984) (1986)
  • Scheuerman, William. The Steel Crisis: The Economics and Politics of a Declining Industry (1986) online Archived 28 October 2010 at the Wayback Machine