Fort Randall Dam
Fort Randall Dam and Power Plant, with Lake Francis Case in the background
Location of Fort Randall Dam in the State of South Dakota
Country	United States
Location	Gregory County and Charles Mix County, South Dakota
Coordinates	43°04′00″N 98°33′14″W / 43.066722°N 98.553897°W / 43.066722; -98.553897
Purpose	Flood control, hydroelectric power, irrigation, water supply, river navigation, and recreation[1]
Status	Operational
Construction began	1946; 78 years ago (1946)
Opening date	1953; 71 years ago (1953)
Construction cost	$200 million
Owner(s)	U.S. Army Corps of Engineers, Omaha District
Dam and spillways
Type of dam	Rolled-earth fill
Impounds	Missouri River
Height	165 ft (50 m)
Length	10,700 ft (3,261 m) (including spillway)
Spillways	21 40-foot × 29-foot tainter gates
Reservoir
Creates	Lake Francis Case
Total capacity	5.418 million acre⋅ft (7 billion m3)
Catchment area	14,150 sq mi (36,648 km2)
Surface area	102,000 acres (41,000 ha)
Maximum length	107 mi (172 km)
Maximum water depth	140 ft (43 m)
Normal elevation	1,350–1,375 feet msl
Power Station
Operator(s)	U.S. Army Corps of Engineers
Website U.S. Army Corps of Engineers - Fort Randall Project

Fort Randall Dam is a 2.03-mile-long (3 km) earthen dam which spans the Missouri River and impounds Lake Francis Case, the 11th-largest reservoir in the U.S.^[2] The dam joins Gregory and Charles Mix counties, South Dakota, a distance of 880 river miles (1,416 km) upstream of St. Louis, Missouri, where the river joins the Mississippi River. The dam and hydroelectric power plant were constructed by and are currently^{[as of?]} operated by the U.S. Army Corps of Engineers.

Fort Randall Dam was authorized by the Flood Control Act of 1944 and plays a key role in the Pick–Sloan Plan for development of water resources in the Missouri River basin. The U.S. Army Corps of Engineers began construction of the dam in 1946, and was the first Pick–Sloan dam completed by the Omaha District. President Dwight D. Eisenhower threw the switch that started the first power generating unit in 1954. When completed in 1956, Fort Randall Dam and the Lake Francis Case Project cost approximately $200 million. U.S. Route 18 and U.S. Route 281 cross the crest of the dam. The dam is just over 3 mi (5 km) north of the Nebraska state line.

The Fort Randall Dam is located within sight of its namesake Fort Randall, an early U.S. Army Frontier Post. Fort Randall Dam is one of six Missouri River mainstem dams; the next dam upstream is Big Bend Dam, near Ft. Thompson, and the next dam downstream is Gavins Point Dam, near Yankton.

The eight generating units of the Fort Randall Dam are capable of generating 40 megawatts of electricity each, with an annual production of 1.727 billion kilowatt-hours.^[3] The combined maximum capacity of 320 megawatts is enough to supply 245,000 households, according to the Corps of Engineers. The river behind the dam drains an area of 263,480 sq mi (682,400 km²). Its reservoir, Lake Francis Case, has a surface area of 102,000 acres (41,000 ha) at maximum operating pool, coinciding with a volume of 5.7 million acre⋅ft (7.0 billion m³).

In June 2011, in response to the 2011 Missouri River Floods, the dam was releasing over 143,000 cu ft/s (4,000 m³/s), which greatly exceeded its previous record release of 67,000 cu ft/s (1,900 m³/s) set in 1997.^[4]

The Fort Randall Visitor Center is located on the western edge of Pickstown, South Dakota, along U.S. Highway 281 and 18.^[5] Open from Memorial Day through Labor Day, the visitor center offers a view of the Dam, Lake Francis Case, and the Missouri River. Exhibits highlight the dam's construction, area, natural and cultural history, and paleontology. There is also a freshwater aquarium with fish species found in the Missouri River.

• Lake Francis Case
• Missouri National Recreational River
• Pick–Sloan Missouri Basin Program
• Pickstown, South Dakota
• List of crossings of the Missouri River

• Media related to Fort Randall Dam at Wikimedia Commons
• Fort Randall Dam & Lake Francis Case - U.S. Army Corps of Engineers