Langbahn Team – Weltmeisterschaft

Brussels S Train

Network map

Brussels S Train
Brussels S Train near Beersel in May 2016
Brussels S Train near Beersel in May 2016
Overview
OwnerInfrabel
LocaleBrussels, Belgium
Transit typeS-Bahn
Number of lines12
Number of stations144
WebsiteS Train (in English)
Operation
Began operation13 December 2015; 9 years ago (2015-12-13)
Operator(s)National Railway Company of Belgium
Headway15 minutes (projected)
Technical
System length350 km (217 mi)
Track gauge1,435 mm (4 ft 8+1⁄2 in) standard gauge
ElectrificationOverhead line, 3,000 V DC
Top speed160 km/h (99 mph)
Network map

The Brussels S Train, also known as the Brussels Regional Express Network (French: Réseau Express Régional Bruxellois or RER; Dutch: Gewestelijk ExpresNet or GEN) is a suburban rail system in and around the Brussels-Capital Region of Belgium. It will offer fast connections and increased frequency within a 30 km (19 mi) radius of the region, covering a territory inhabited by 2.5 million people.[1]

Most jobs in the Brussels-Capital Region are filled by workers from other regions. Private vehicles clog the city daily, hampering mobility and creating pollution. The RER/GEN is a response to these growing problems. Only 20% of commuters use public transport daily[when?]; the goal is to double this figure by facilitating movement into and within the region.[citation needed]

Total costs for the GEN/RER project will be at least €2.173bn.[2] The initially planned nine lines[3] have since increased to 12; but the projected frequency of "a departure at least every 15 minutes"[4] has not been implemented as of early 2018: most services run once per hour, a few twice per hour.

The scope includes widening existing railway lines from double to quadruple; a few additions like the Schuman-Josaphat tunnel; the creation or re-activation of stations just outside Brussels' city centre (Germoir/Mouterij and Arcades/Arcaden on the south-east, Brussels-West and Tour et Taxis/Thurn en Taxis on the west); and the acquisition of new rolling stock.

History

A first draft of the RER/GEN network was published in 1995. The commissioning of the first lines was then planned for 2002.

Construction requires the approval and funding from the Federal Government and the three regions, as well as the collaboration of four public transit companies (NMBS/SNCB, MIVB/STIB, De Lijn and TEC). The initial work started in 2005, and service was supposed to start in 2012. However, Belgium's administrative complexity caused numerous delays and postponements; the network will now be put into service between 2015 and 2025.[5]

Infrastructure

Railway lines within a 30 km (19 mi) radius of Brussels are included in the project.[6] Parts of the project are already in place. The most substantial works relate to the quad-tracking of several lines: two tracks for GEN/RER trains, and two tracks for intercity and high-speed trains.[7]

The RER/GEN project includes a 1.25 km (0.78 mi) double-tracked Schuman-Josaphat tunnel in the north-east of the region. This links the European Quarter to Brussels Airport, cutting to 13 minutes journey times between the two.[4]

Most of the network uses existing rail lines. Increased frequencies and passengers, however, requires other significant infrastructure projects, in addition to the Schuman-Josaphat tunnel:

  • Quad-tracking of sections in order to segregate local and regional traffic from faster inter-city trains
  • Demolition and reconstruction of several bridges that cross the wider track
  • Construction of additional breakpoints
  • Installation of noise barriers
  • Redevelopment of 28 existing stations in Brussels
  • Creation of transfer points
  • Construction of park-and-ride lots

Rolling stock

As of 2020, most services are operated by either new Siemens Desiro or refurbished MS86 "Sprinter", both electric multiple units.

NMBS/SNCB had ordered 305 Siemens Desiro ML single-deck electric multiple units,[8] a €1.425bn contract. These will have a 2MW power rating and a capacity of 280, with construction announced as being at Siemens' plant in Krefeld-Uerdingen,[9] Germany.[4]

Network

Line Route Stops Frequency
S1 Antwerp–Mechelen–Brussels NSC–Nivelles 31 2x/h
S2 Braine-le-Comte–Brussels NSC–Leuven 22 2x/h
S3 Zottegem–Brussels NSC–Dendermonde 25 1x/h (weekdays only, replaced by through running S8 on weekends)
S4 Aalst-Etterbeek-Merode-Vilvoorde 26 1x/h (weekdays only)
S5 Geraardsbergen-Schuman-Josaphat tunnel-Mechelen 25 2x/h (Halle-Mechelen)
1/h (Geraardsbergen-Halle)
S6 Schaarbeek-NSC-Geraardsbergen-Denderleeuw 21 1x/h
S7 Halle-Merode-Mechelen via Hofstade 18 1x/h
S8 Louvain-la-Neuve-NSC-Brussels-South-(Zottegem) 16 2x/h (1/2 train continues to Zottegem). (1x/h on weekends)
S81 Ottignies-Schaarbeek 10 Peak (weekdays only)
S9 Braine-l'Alleud-Schuman-Josaphat tunnel-Leuven 19 1xh Peak
S10 Aalst-NSC-Brussels West-Dendermonde 28 1x/h
S19 Charleroi-Schuman-Josaphat tunnel-Brussels Airport 20 1x/h (weekdays)
Nivelles-Schuman-Josaphat tunnel-Brussels Airport-Leuven 15 1x/h (weekends)
S20 Ottignies-Leuven 13 2x/h

S20 connects Leuven (S2/S9) and Ottignies (S8/S81) without passing through Brussels Capital Region.

Network Map

Map


See also

References

  1. ^ (in English) http://www.railway-technology.com/projects/brusselsrer/specs.html
  2. ^ (in French) [1]
  3. ^ (in French) http://www.b-rail.be/corp-r/F/projects/project_rer/lines/index.php
  4. ^ a b c (in English) http://www.railway-technology.com/projects/brusselsrer/
  5. ^ (in French) http://www.lalibre.be/actu/brabant/article/480429/le-rer-en-2017.html
  6. ^ (in French) http://www.lalibre.be/economie/actualite/article/338350/pas-de-rer-a-brussels-before-2016.html
  7. ^ (in English) [2]
  8. ^ (in English) [3]
  9. ^ "Desiro ML - Mobility - Siemens". www.mobility.siemens.com. Retrieved 2015-10-11.
Quelle: https://en.wikipedia.org/wiki/Brussels_Regional_Express_Network