Langbahn Team – Weltmeisterschaft

8×63mm patron m/32

8×63mm
Two 8×63mm patron m/32 military cartridges
TypeRifle
Place of originSweden
Service history
In service1932–1975
Used bySweden
WarsUN intervention in Kongo 1960-1964
Production history
DesignerKungliga Armétygförvaltningen (KAF)
AktieBolaget Bofors
Designed1927–1932
ManufacturerAB Bofors
Specifications
Case typeRebated, bottleneck
Bullet diameter8.20 mm (0.323 in)
Neck diameter9.10 mm (0.358 in)
Shoulder diameter11.51 mm (0.453 in)
Base diameter12.43 mm (0.489 in)
Rim diameter12.18 mm (0.480 in)
Rim thickness1.42 mm (0.056 in)
Case length62.81 mm (2.473 in)
Overall length84.62 mm (3.331 in)
Primer typeBerdan, Large rifle
Ballistic performance
Bullet mass/type Velocity Energy
14.2 g (219 gr) m/32 FMJ 760 m/s (2,500 ft/s) 4,101 J (3,025 ft⋅lbf)
Test barrel length: 609 mm (24 in)
Source(s): [1]

The 8×63mm patron m/32 was a bottlenecked centrefire cartridge with a slightly (0.25 mm (0.0098 in)) rebated rim for Swedish heavy and medium machine guns. It was used from 1932 to the finalisation of the re-chambering process of these machine guns to 7.62×51mm NATO in 1975.

History

Left; 8×63mm patron m/32 cartridge with 14.2 g (219.1 gr) m/32 bullet
Right; 7.92×57mm Mauser cartridge
and 11.55 g (178.2 gr) S.m.E. (mild steel cored) 8 mm S bore bullet

Given the experiences of the devastating effect of small arms fire, including the long-range, even indirect fire of the machine guns, in the Russo-Japanese War and World War I, as well as a revolution in terminal ballistic calculations, calibre-related concerns occupied a lot of attention worldwide in military establishments.[2] Sweden was no exception, and series of trials in calibres 6mm-12mm were conducted until the late 1920s.[2] At this time, the standard service cartridge in Swedish use was the 6.5×55mm Swedish skarp patron m/94 projektil m/94 (live cartridge m/94 projectile m/94) service ammunition loaded with a 10.1 grams (156 gr) long round-nosed m/94 (B-projectile) bullet. After study-travels by Lieutenant Colonel de Laval along with Captains Nygren and Holmgren, mainly to Germany and the Netherlands in October 1930, Royal Swedish Army Materiel Administration (Kungliga Armétygförvaltningen (KAF) appointed a commission that conducted a series of tests with calibres 6,5 mm to 7,2 – 7,5 – 7,9 mm, and bullet weights between 8.4 grams and 17.0 grams, with the intention to either recommend a new calibre for the kulspruta m14-29 or retain the 6.5×55mm but with a new boat tailed spitzer bullet, as the old blunt nosed projectile m/94 had inferior ballistics.[2] The commission found that at ranges below 2,400 m (2,625 yd), no recommendation could be given without indepth analysis of intended tasks within the tactical doctrine.[2] Past this, the 14.2 gram bullet in calibre 7.9mm had superior performance in precision and penetration while not causing excessive barrel wear as well as fulfilling the requirement of 20 kilogram-metres impact force up to a range of 3,600 m (3,937 yd).[2] Based on this, KAF tasked AB Bofors to develop and manufacture the larger rifle cartridge to meet these needs.[2]

Design

The patron m/32 round had the same overall length as the .30-06 Springfield cartridge, which allowed it to fit in the standard Browning receiver, but used a larger diameter case and share the 6.5×55mm 12.2 mm (0.48 in) diameter bolt face. Compared to the 1928 pattern .30-06 Springfield M1 Ball the 8×63mm patron m/32 was loaded with 8.20 mm (0.323 in) S bore 14.2 g (219.1 gr) bullets and had more muzzle energy. The 8×63mm patron m/32 had a muzzle velocity of 760 m/s (2,493 ft/s) and an operating pressure of 330 MPa (47,862 psi).

The patron m/32's aerodynamically refined boat tailed spitzer bullet had a useful range of approximately 3,600 m (3,937 yd) on which the impact energy was 20 kilogram-meters (196 J / 145 ft⋅lbf),[3][4] and a maximum range of approximately 5,500 m (6,015 yd) when fired from a kulspruta m/36.[5] Reverse engineering the trajectory from the previous sentence indicates a ballistic coefficient (G1 BC) of approximately 0.63. Available with armour piercing bullets, patron m/32 was used in the UN-forces' KP-bil during the Congo-crisis against the separatists' armoured cars.

The 8×63mm patron m/32 cartridge was used in the following machine guns:[6]

The 8×63mm patron m/32 was also used in the gevär / pansarvärnsgevär m/40[2] bolt-action rifle, Karabiner 98k's re-chambered in Sweden for the patron m/32. Originally purchased as the pvg m/39 in 8×57 IS as a stop-gap anti-tank rifle (despite being unsuited for the role), the re-chambered 8×63 rifles were designated m/40, and later issued to machine gun crews so their rifles would fire the same round as their machine guns. Besides the rechambering a muzzle brake was added necessitated by the additional recoil produced by the more powerful 8×63mm patron m/32 cartridge.

Military ammunition

Designation Type Weights (gram) Propellant type Projectile material(s) Muzzle velocity V0 or V25 Burning range Marking Remarks
Cartridge Projectile Propellant
8 mm sk ptr m/32 FMJ 32.1 g
(495 gr) 		14.13 g
(218.1 gr) 		3.6 g
(56 gr) 		Kspkr 1/0,55 Lead core, Nickel jacket 750 m/s (V25) None Standard Ball.
8 mm sk ptr m/32

"For peacetime only"

FMJ 32,17 14,2 3,6 Kspkr 1/0,55 Lead core, Nickel jacket 760 m/s
(2,500 ft/s) 		Blue tip Ammunition of inferior quality.

Used in peacetime.

8 mm sk ptr m/32

"Not for machine guns"

FMJ 32,17 14,2 3,6 Kspkr 1/0,55 Lead core, Nickel jacket 760 m/s Green tip Same as above but has green marking.

This means "Not for machine guns"

8 mm sk ptr m/32 pprj m/39 AP 29,7 11,8 3,6 Kspkr 1/0,55 pbr 3,2 g steel core 780-810 m/s Black tip Ordinary armor-piercing cartridge. Penetration of ~10 mm at 50 m
8 mm sk ptr m/32 pprj m/40

or 8 mm pbr ptr m/32-40

AP 31,14 15,7 3,6 Kspkr 1/0,55 pbr Tungsten core 725 m/s Top half black Tungsten-cored ammunition. Penetration of ~20 mm at 0 m

Only used in machine guns.

8 mm sk ptr m/32 slprj m/39 Tracer 28,9 11,01 3,6 Kspkr 1/0,55 Projectile contains phosphorus, no boat tail 780-824 m/s red 100-800 m Red tip First marking of slprj m/39
White tip Second marking of slprj m/39.
8 mm sk ptr m/32 slprj m/39

"with a different primer"

Tracer 28,9 11,01 3,6 Kspkr 1/0,55 Projectile contains phosphorus, no boat tail 780-824 m/s Red 100-800 m Red tip The primer is dark gray and non-magnetic. Likely manufactured in Germany.
8 mm sk ptr m/32 brandprj m/40[citation needed] Incendiary 11,55 Phosphorus and lead Yellow tip Incendiary ammunition from Hungary. Trubbkula.
8 mm sk ptr m/32 brandprj m/41 Incendiary/AP 27,7 9,8-9.9 3,6 Kspkr 1/0,55 pbr Has an internal steel core surrounderd by fuel 835-930 m/s Orange tip The ammunition is primarily for aircraft and is a semi-armor piercing projectile
8 mm Tysk B patron

"Observation cartridge"

High-explosive incendiary Bottom halve black German B bullet loaded in a Swedish 8×63 cartridge.
8 mm sk blindptr m/32 Dummy None Early marking.
8 mm sk blindptr m/32 Dummy Green tip Late marking.

The operating pressures of the various ammunition types varied between 330–350 MPa (47,862–50,763 psi).

See also

References

  1. ^ 8x63 Swedish / 8x63 Bofors (in Russian)
  2. ^ a b c d e f g Sammanfattning av rapport Till Kungl. Arméförvaltningens artilleridepartement (in Swedish)
  3. ^ The useful maximum range is defined by the maximum range of a small-arms projectile while still maintaining the minimum kinetic energy required to put unprotected personnel out of action, which is generally believed to be 15 kilogram-meters (147 J / 108 ft⋅lbf).
  4. ^ Kjellgren, G. L. M. "The Practical Range of Small Arms" (PDF). The American Rifleman. pp. 40–44. Archived (PDF) from the original on 5 March 2015.
  5. ^ Swedish Kulspruta m/36 at forgottenweapons.com
  6. ^ Arméplanch för utbildning fotograferad av Göta Vapenhistoriska Sällskap (in Swedish)
Quelle: https://en.wikipedia.org/wiki/8%C3%9763mm_patron_m/32