Langbahn Team – Weltmeisterschaft

Trimethylindium

Trimethylindium
Stereo, skeletal formula of trimethylindium with all implicit hydrogens shown
Ball and stick model of trimethylindium
Names
Preferred IUPAC name
Trimethylindium
Systematic IUPAC name
Trimethylindigane[1]
Other names
Trimethylindane, indium trimethyl
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.020.183 Edit this at Wikidata
EC Number
  • 222-200-9
UNII
  • InChI=1S/3CH3.In/h3*1H3; checkY
    Key: IBEFSUTVZWZJEL-UHFFFAOYSA-N checkY
  • InChI=1/3CH3.In/h3*1H3;/rC3H9In/c1-4(2)3/h1-3H3
    Key: IBEFSUTVZWZJEL-SGQDGSKVAB
  • C[In](C)C
Properties
InC
3H
9
Molar mass 159.922 g mol−1
Appearance White, opaque crystals
Density 1.568 g cm−3 (at 20 °C)
Melting point 88 °C (190 °F; 361 K)
Boiling point 134 °C (273 °F; 407 K) (decomposes above 101 °C (214 °F; 374 K))
Reacts
Thermochemistry
150.5-169.7 kJ mol−1
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
 Pyrophoric
GHS labelling:
GHS02: FlammableGHS05: Corrosive
Danger
H250, H260, H261, H314
P210, P222, P223, P231+P232, P260, P264, P280, P301+P330+P331, P302+P334, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P335+P334, P363, P370+P378, P402+P404, P405, P422, P501
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Trimethylindium, often abbreviated to TMI or TMIn, is the organoindium compound with the formula In(CH3)3. It is a colorless, pyrophoric solid.[2] Unlike trimethylaluminium, but akin to trimethylgallium, TMI is monomeric.[3]

Preparation

TMI is prepared by the reaction of indium trichloride with methyl lithium.[2][4]

InCl3 + 3 LiMe → Me3In.OEt2 + 3 LiCl

Properties

Compared to trimethylaluminium and trimethylgallium, InMe3 is a weaker Lewis acid. It forms adducts with secondary amines and phosphines.[5] A complex with the heterocyclic triazine ligand (PriNCH2)3 forms a complex with 6-coordinate In, where the C-In-C angles are 114°-117° with three long bonds to the tridentate ligand with N-In-N angles of 48.6° and long In-N bonds of 278 pm.[6]

Structure

In the gaseous state InMe3 is monomeric, with a trigonal planar structure, and in benzene solution it is tetrameric.[5] In the solid state there are two polymorphs, a tetragonal phase which is obtained, for example, by sublimation and a lower density rhombohedral phase discovered in 2005,[7] when InMe3 re-crystallised from hexane solution.

In the tetragonal form InMe3 is tetrameric as in benzene solution and there is bridging between tetramers to give an infinite network. Each indium atom is five coordinate, in a distorted trigonal planar configuration, the three shortest bonds,(ca. 216 pm ) are those in the equatorial plane, with longer axial bonds, 308 pm for the In-C bonds joining the InMe3 units to form the tetramers and 356 pm for the In-C linking the tetramers into an infinite network.[8] The solid state structures of GaMe3 and TlMe3 are similar.[8] The association in the solid state accounts for the high melting point of 89°-89.8 °C compared to triethylindium which melts at -32 °C.[5]

The rhombohedral form of InMe3 consists of cyclic hexamers with 12 membered (InC)6 rings in an extended chair conformation. The hexamers are interlinked into an infinite network. Indium atoms are five coordinate the equatorial In-C distances average 216.7pm almost identical to the average for the tetragonal form, and the axial bonds are 302.8pm joining the InMe3 units into hexamers and 313.4 pm linking the hexamers to form the infinite network.[7]

Application to microelectronics

Indium is a component of several compound semiconductors, including as InP, InAs, InN, InSb, GaInAs, InGaN, AlGaInP, AlInP, and AlInGaNP. These materials are prepared by metalorganic vapour phase epitaxy (MOVPE) and TMI is the preferred source for the indium component. High purity in TMI (99.9999% pure or greater) is essential for many of these applications. For some materials, electron mobilities are observed as high as 287,000 cm²/Vs at 77 K and 5400 cm²/Vs at 300 K, and background carrier concentration as low as 6×1013 cm−3.[9][10]

Vapor pressure equation

The vapor pressure equation log P (Torr) = 10.98–3204/T (K) describes TMI within a wide range of MOVPE growth conditions.[11]

Safety

TMI is pyrophoric.[12]

References

  1. ^ "Trimethylindium - PubChem Public Chemical Database". The PubChem Project. USA: National Center for Biotechnology Information. 27 March 2005. Descriptors Computed from Structure. Retrieved 21 September 2011.
  2. ^ a b Bradley, D. C.; Chudzynska, H. C.; Harding, I. S. (1997). "Trimethylindium and Trimethylgallium". Inorganic Syntheses. Vol. 31. pp. 67–74. doi:10.1002/9780470132623.ch8. ISBN 978-0-471-15288-0.
  3. ^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 262. ISBN 978-0-08-037941-8.
  4. ^ Main Group compounds in Inorganic Syntheses, vol 31, Schultz, Neumayer, Marks; Ed., Alan H. Cowley, John Wiley & Sons, Inc., 1997, ISBN 0471152889
  5. ^ a b c CVD of compound semiconductors, Precursor Synthesis, Development and Applications, Anthony C. Jones, Paul O'Brien, John Wiley & Sons, 2008, ISBN 3527292942
  6. ^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 263. ISBN 978-0-08-037941-8.
  7. ^ a b Lewiński, Janusz; Zachara, Janusz; Starowieyski, Kazimierz B.; Justyniak, Iwona; Lipkowski, Janusz; Bury, Wojciech; Kruk, Przemysław; Woźniak, Robert (2005). "A Second Polymorphic Form of Trimethylindium: Topology of Supramolecular Architectures of Group 13 Trimethyls". Organometallics. 24 (20): 4832–4837. doi:10.1021/om050386s. ISSN 0276-7333.
  8. ^ a b Inorganic Chemistry, (2d edition), Catherine E. Housecroft, Alan G. Sharpe, Pearson Education, 2005, ISBN 0130399132 , ISBN 978-0130399137
  9. ^ Shenai, Deo V.; Timmons, Michael L.; Dicarlo, Ronald L.; Lemnah, Gregory K.; Stennick, Robert S. (2003). "Correlation of vapor pressure equation and film properties with trimethylindium purity for the MOVPE grown III–V compounds". Journal of Crystal Growth. 248: 91–98. Bibcode:2003JCrGr.248...91S. doi:10.1016/S0022-0248(02)01854-7.
  10. ^ Shenai, Deodatta V.; Timmons, Michael L.; Dicarlo, Ronald L.; Marsman, Charles J. (2004). "Correlation of film properties and reduced impurity concentrations in sources for III/V-MOVPE using high-purity trimethylindium and tertiarybutylphosphine". Journal of Crystal Growth. 272 (1–4): 603–608. Bibcode:2004JCrGr.272..603S. doi:10.1016/j.jcrysgro.2004.09.006.
  11. ^ Shenai-Khatkhate, Deodatta V.; Dicarlo, Ronald L.; Ware, Robert A. (2008). "Accurate vapor pressure equation for trimethylindium in OMVPE". Journal of Crystal Growth. 310 (7–9): 2395. Bibcode:2008JCrGr.310.2395S. doi:10.1016/j.jcrysgro.2007.11.196.
  12. ^ Chemistry of Materials (2000); doi:10.1021/cm990497f
Quelle: http://en.wikipedia.org/wiki/Trimethylindium