The Aravalli Mountain Range is a northeast-southwest trending orogenic belt in the northwest part of India and is part of the Indian Shield that was formed from a series of cratonic collisions.^[1] The Aravalli Mountains consist of the Aravalli and Delhi fold belts, and are collectively known as the Aravalli-Delhi orogenic belt. The whole mountain range is about 700 km long.^[2] Unlike the much younger Himalayan section nearby, the Aravalli Mountains are believed much older and can be traced back to the Proterozoic Eon. They are arguably the oldest geological feature on Earth.^[3] The collision between the Bundelkhand craton and the Marwar craton is believed to be the primary mechanism for the development of the mountain range.^[1]

The precise evolutionary processes responsible for the Aravalli Mountain Range remains controversial today, and there are diverse theories put forward for the tectonic history.

The Aravalli Mountain Range features a horst-like structure and consists of a series of Proterozoic rocks that are intensely deformed and metamorphosed.^[4]

Three main subdivisions of rocks constitute the stratigraphy of the mountain range, with the Archean Bhilwara Gneissic Complex basement being the lowest strata, followed by the overlying lower Aravalli Supergroup and the upper Delhi Supergroup.^[2] The northern part of the mountain range only consists of the Delhi Supergroup, and this has given to its name of ‘North Delhi Belt.^[2] On the southern side, however, both the Aravalli and Delhi supergroups are present. The mountain range is bounded by the Eastern and Western marginal faults, where the former is also termed as the Great Boundary Fault.^[4]

The Bhilwara Gneissic Complex basement is about 2.5 Ga old.^[2] It is made up of a group of metamorphic and igneous rocks that are mainly amphibolite to granulite grade, tonalitic to granodioritic gneisses and intrusive granitoids with a minor amount of metasedimentary and metavolcanic rocks.^[5][6] The basement is categorized into two subdivisions: the Sandmata Complex and the Mangalwar Complex.^[7][8] The Sandmata Complex refers to gneisses and granitoids while the Mangalwar Complex refers to the metasedimentary and metavolcanic series which are considered to be metamorphosed older granite-greenstone belt.^[7][8]

On top of the Archean basement, the Aravalli Supergroup overlies with clear unconformities separating the two strata.^[4] The Aravalli Supergroup is divided into three groups: lower Delwara Group, middle Debari Group, and Upper Jharol Group.^[9] The lower and middle groups shared similar lithology, where both groups are dominated by carbonates, quartzite, and pelitic rocks, thus suggesting a shelf depositional environment. Turbidite facies and argillaceous rocks are prominent in the upper Jharol group, thus suggesting a deep marine depositional environment.^[9] The depositional age of these sequences ranges approximately from 2.1 to 1.9 Ga.^[2]

Three major episodes of deformation and metamorphism were involved in the Aravalli Supergroup, including foldings, shearing, kink bands and crenulations etc.^[9] Metamorphic grades of the rocks generally range from greenschist facies to amphibolite facies.^[9]

The upper Delhi Supergroup overlies on the Aravalli Supergroup with a clear unconformity.^[4] This supergroup hosts two main types of rocks: a thick sequence of volcanic rocks that is of continental affinity; and sedimentary rocks that represent fluvial and shallow marine environments and deep marine depositional environment.^[4] The depositional age of these sequences is approximately from 1.7 to 1.5 Ga.^[2]

In the ‘North Delhi belt’, the Delhi Supergroup is classified into three groups: lower Raialo Group, middle Alwar Group, and upper Ajabgarh Group.^[5][10] The Raialo Group consists predominantly of mafic volcanic and calcareous rocks.^[2] The Alwar Group mainly consists of arenaceous and mafic volcanic rocks.^[2] The Ajabgarh Group is dominated by carbonate, mafic volcanic and argillaceous rocks.^[2] In the southern part, similar rock types, despite different names, are identified, where they are Gogunda Group (equivalent to Alwar group) and the Kumbhalgarh Group (equivalent to Ajabgarh Group).^[5][11]

The tectonic evolution of the Aravalli-Delhi orogenic belt can be divided into four phases:^[7]

1. Bhilwara Gneissic Complex (~ 2,500 Ma)
2. Aravalli Orogeny (~ 1,800 Ma)
3. Delhi Orogeny (~ 1,100 Ma)
4. Post-orogenic evolution (~ 850 – 750 Ma)

Two phases of rifting, sedimentation, collision and suturing were documented in the tectonic evolution of the Aravalli-Delhi orogenic belt.^[7] During Proterozoic Eon, N-S convergence between the Bundelkhand and Bhandara cratons at the Satpura Mobile Belt, and E-W convergence between the Bundelkhand and Marwar cratons at the Aravalli-Delhi orogenic belt have synchronously occurred in India.^[1] This resulted in an overall resultant force of NE-SW convergence of the Aravalli-Delhi orogenic belt, and also led to the arcuate shape of its convergent zone.^[1]

The Aravalli Mountains basement started with an older sialic crust evolving into extensive granitic batholiths by the emplacement of granitic bodies during the period ca. 3.0 to 2.5 Ga.^[4] This subsequently led to rapid cratonization and rapid thickening of crust to about 20–25 km.^[12][13] The main crustal source is believed to be old crustal components of the area.^[5][14] The region subsequently experienced a large scale metamorphic event that granite is partly metamorphosed into gneissic rocks, forming the Archean Basement.^[4] These cratonization processes continued together signifying the end of amalgamation of cratonic nuclei that constitutes the development of an early continental crust.

During the Paleoproterozoic Era, the opening of Aravalli oceanic basin separated the eastern Bundelkhand craton and the western Marwar craton.^[7] Sedimentation of the Aravalli Supergroup took place simultaneously with basic magmatism and followed by a gradual subsidence of the Aravalli Basin floor.^[4][15]

Soon after the rifting phase ended, the compressional phase took place where the eastern Bundelkhand craton subducted under the western Marwar craton.^[7] As collision continued, the subduction zone steepened, leading to the development of an island arc between the two cratons.^[7] After collision had proceeded for a certain period of time, the uplift of the Aravalli Supergroup was induced at around 1800 Ma.^[2][7] In the last stage of convergence, the thrust fault further steepened and the colliding blocks eventually become sutured.^[7] The suture zone is marked by the Great Boundary Fault.^[9]

During the Mesoproterozoic Era, another rifting phase began.^[7][16] At that time, the Bundelkhand-Aravalli-BGC and the Marwar craton lie on the eastern side and western side respectively as the rifting phase separated the Bhilwara Gneissic Complex (BGC) from the Marwar craton.^[7] The oceanic basin created in the course of rifting received the Delhi Supergroup sediments.

The compressional phase that followed led to eastward subduction of the western Marwar craton.^[7] Continuous subduction of the western block might have created another island arc, and similar to the Aravalli orogeny, further collision between the two blocks with island arc in between gave rise to the development of the Delhi orogeny around 1100 Ma.^[5][7] The suture zone between the two cratons is marked by the Western Marginal Fault and the emplacement of the Phulad Ophiolite Suite in the region.^[9]

The epilogue of the tectonic evolution was marked by granitic and rhyolitic magmatic events, namely the emplacement of the Erinpura granite and the Malani Volcanics on the western side of Aravalli-Delhi orogenic belt.^[4] This event is ranked third among the largest igneous province in the globe, with a total area of about 52,000 km² in India.^[9] Malani Igneous Suite is a collective term for bimodal volcanic and plutonic rocks aged 873–800 Ma in the area.^[9] The lithologies of the rock suite are predominantly rhyolitic and rhyodacitic volcanic rocks with granitoid intrusions overlying unconformably or intruding through the Delhi Supergroup.^[6][9]

Apart from the vigorous post-orogenic magmatic event, a large number of so-called ‘Purana’ basins was actively developing near the orogenic belts.^[9] The word ‘Purana’ means ‘ancient’ and was used to depict the group of isolated sedimentary basins with thick Proterozoic sedimentary strata that are relatively undeformed on the Indian Shield.^[2] The Vindhyan Basin and the Marwar Basin are part of the Purana basins that sit near the Aravalli Mountain Range.

• Vindhyan Basin

The Vindhyan Basin is located on the southeastern side of the Aravalli Mountain Range where its formation is believed to be associated to the large downwarp of the crust after Delhi Orogeny.^[9] It spans an area of about 104,000 km² in the northwestern part of India overlying on the Archean Bhilwara Gneissic Basement.^[17] The Vindhyan Supergroup is classified into two fundamental strata, lower and upper Vindhyan, with a large unconformity representing 500 million years interval between the strata.^[2] Within each stratum, it is further categorized into major groups. The lower Vinhydan comprises the Semri Group while the upper Vinhyan consists of the Kaimur Group, Rewa Group, and Bhander Group.^[2] The earliest sedimentation forming the lower Vindhyan can be traced back to Paleoproterozoic and stopped somewhere around early Mesoproterozoic (~1,721 Ma to 1,600 Ma).^[17] Sedimentation forming the upper Vindhyan resumed again in the Mesoproterozoic and ceased in Neoproterozoic.^[17][18] Vindhyan Supergroup portrayed transitional to shallow marine depositional environment, such as alluvial fan, delta, tidal flat, carbonate ramp etc.^[17]

• Marwar basin

To the west of the Aravalli Mountain Range and far beyond the Vindhyan Basin lies the Neoproterozoic-to-Cambrian-aged Marwar Basin.^[9] The Marwar Basin sits on the Malani Igneous Suite and contains a sedimentary section of 2 km in thickness.^[9] Similar to other Purana basins, the Marwar Supergroup is less deformed and unmetamorphosed. The Marwar Supergroup is classified into three major groups: the lower Jodhpur Group, the middle Bilara Group, and the upper Nagaur Group.^[9] Arenaceous rocks, calcareous rocks and evaporites are the dominant rock type in the Marwar Basin.^[9]

The tectonic events and basin developmental phases are thought to be correlated to the amalgamation and breakup of plates during supercontinent cycles of Columbia, Rodinia, and Gondwana.

The Aravalli orogeny (~1,800 Ma) began with the development of oceanic basin. The rifting process is believed to be associated with the formation of the Columbia supercontinent, which happened from 2.5 Ga to 1.8 Ga and was coeval with the onset of Aravalli orogeny's rifting basin.^[9] The opening of another sedimentary basin during the Delhi orogeny (~-1,100 Ma) coincided with the time where the supercontinent Columbia broke up, and the cessation of basin development followed by a compressional phase was concurrent with the assembly of Rodinia.^[9][17] The deposition of the upper Vindhyan Supergroup may also denote the final episode of Rodinia formation.^[9] Several geochemical analyses show that detrital zircon samples obtained from the Marwar basin are highly linked to the breakup phase of Rodinia and the assembly phase of Gondwana.^[9]

• 
  Reconstruction of Columbia supercontinent
• 
  Godwana supercontinent

• Geology of India