Cessna 441 Conquest II
General information
Type	Utility aircraft
National origin	United States
Manufacturer	Cessna
Number built	362[1]
History
Manufactured	1977–1986[1]
First flight	January 10, 1977[2]
Developed from	Cessna 404 Titan

The Cessna 441 Conquest II is the first turboprop powered aircraft designed by Cessna and was meant to fill the gap between their jets and piston-engined aircraft. It was developed in November 1974, with the first aircraft delivered in September 1977. It is a pressurized, 8–9 passenger turbine development of the Cessna 404 Titan. The ICAO designator as used in flight plans is C441.

The original design from 1972 for this aircraft was known as the Model 435 and was to be powered by Continental GTSIO-520X engines with three-bladed propellers. By 1975, the designed evolved into the turboprop-powered Model 441.^[2] It was certified by the FAA on August 19, 1977.^[3] The high aspect ratio wings use bonded construction techniques.^[4] Cessna renamed the Model 441 the Conquest II in 1983. 1984 models starting with constructor number 195 used lighter-weight, four-bladed McCauley propellers.^[2] A 441 with Pratt & Whitney Canada PT6A-112 turboprops was flown in 1986, but did not enter production. Cessna built 362 of the aircraft between 1977 and 1986.^[1] A smaller aircraft was marketed as the Cessna 425 Conquest I, itself a turbine development of the Cessna 421.

In September 2007, Cessna limited the Conquest II to 22,500 hours of air time through a Supplemental Inspection Document. This makes it effectively mandatory for US air carriers but only advisory for private operators.^[5]

The Cessna 441 cruises at 316 kn (585 km/h) true airspeed while burning 480 lb (220 kg) of fuel per hour at flight level 290. The aircraft's maximum range is 2,000 nmi (3,700 km) at 260 kn (480 km/h) TAS and 310 lb (140 kg)/h at FL350. With six to nine seats, its 6,400–6,500 lb (2,900–2,900 kg) basic operating weight (BOW) allows a 200–300 lb (91–136 kg) payload at full fuel, but MTOW can be increased by 490 lb (220 kg) with aftermarket modifications.

Most 441s currently in service have been upgraded to TPE331-10 engines and four-bladed propellers (if not originally equipped). The -10 engine increases climb performance, service ceiling, and TBO, while four-blade propellers increase climb rate, cruise speed, and ground clearance, while reducing cabin noise.^[6]

The Conquest II is operated by corporate owners, air charter operators and previously by the Royal Flying Doctor Service in Australia. Examples of the type have been exported to many countries including Austria, Australia, Canada, Ecuador, Finland, Germany, Iceland, Mexico, Norway, Peru, South Africa, Sweden and the United Kingdom.

By May 2019, 290 aircraft remained in service, at a $.75-.9M value down from $1-1.9M in 2011.

Data from Jane's All The World's Aircraft 1982–83^[7]

General characteristics

• Crew: 1 or 2 pilots
• Capacity: 8–10 passengers
• Length: 39 ft 0 in (11.89 m)
• Wingspan: 49 ft 4 in (15.04 m)
• Height: 13 ft 2 in (4.01 m)
• Wing area: 253.6 sq ft (23.56 m²)
• Aspect ratio: 9.6:1
• Airfoil: NACA 23018 at root, NACA 23019 at tip
• Empty weight: 5,682 lb (2,577 kg)
• Gross weight: 9,850 lb (4,468 kg)
• Powerplant: 2 × Garrett TPE331-8-403S turboprops, 636 shp (474 kW) each
• Propellers: 4-bladed McCauley

Performance

• Maximum speed: 340 mph (550 km/h, 300 kn) at 16,000 ft (4,875 m)
• Cruise speed: 298 mph (480 km/h, 259 kn) at 35,000 ft (10,700 m)
• Stall speed: 86 mph (139 km/h, 75 kn) flaps and gear down
• Range: 2,525 mi (4,064 km, 2,194 nmi) at 35,000 ft (10,700 m)
• Service ceiling: 35,000 ft (11,000 m)
• Rate of climb: 2,435 ft/min (12.37 m/s)

Avionics

• Cessna 1000A Integrated Flight Control System

Aircraft of comparable role, configuration, and era

• Beechcraft King Air
• Mitsubishi Mu-2
• Piper PA-42 Cheyenne
• Swearingen Merlin

• Airliners.net - Photographs
• Airliners.net - Cessna Conquest