Cambrian Line
An Arriva Trains Wales Class 158 pulls into Dovey Junction station, where the line splits to Pwllheli and Aberystwyth
Overview
Other name(s)	Cambrian Main Line (partially) Cambrian Coast Line (partially) Cambrian Railway
Native name	Llinell y Cambrian Prif Linell y Cambrian Llinell Arfordir y Cambrian Rheilffordd y Cambrian
Status	Operational
Owner	Network Rail
Locale	England: Shropshire Wales: Powys Ceredigion Gwynedd
Termini	Shrewsbury Pwllheli / Aberystwyth
Stations	34
Service
Type	Heavy rail
System	National Rail
Services	Shrewsbury–Pwllheli Shrewsbury–Aberystwyth
Operator(s)	Transport for Wales
Rolling stock	Class 158 Express Sprinter
History
Opened	1855–1869
Technical
Line length	Shrewsbury–Aberystwyth 80 mi 59 ch (129.93 km) Shrewsbury–Pwllheli 117 mi 69 ch (189.68 km)
Number of tracks	1 (with passing loops)
Character	Rural
Track gauge	1,435 mm (4 ft 8+1⁄2 in) standard gauge
Electrification	None
Signalling	ETCS Level 2
Route map (Click to expand) Show map Legend Welsh Marches line to Crewe Shrewsbury–Chester line to Chester Shrewsbury Wolverhampton–Shrewsbury line to Wolverhampton Shrewsbury Abbey Coleham Severn Valley Railway to Kidderminster Town Welsh Marches line to Newport Shropshire & Montgomeryshire Railway to Kinnerley Junction Hanwood Minsterley branch line to Minsterley Yockleton Westbury Plas-y-Court Halt England Wales Breidden Oswestry & Newtown Railway to Oswestry Buttington Welshpool Welshpool Raven Square Welshpool & Llanfair Light Railway to Llanfair Caereinion River Severn Forden Montgomery Kerry branch line to Kerry Abermule Newtown Scafell Halt Moat Lane Junction Mid-Wales Railway to Llanidloes River Severn River Severn Caersws Pontdolgoch Carno Talerddig Talerddig cutting through the Cambrian Mountains Llanbrynmair Commins Coch Halt Mawddwy Railway to Dinas Mawddwy Cemmes Road Corris Railway to Corris Machynlleth Dovey Junction Glandyfi Ynyslas Borth Llandre Bow Street (first station) Bow Street Vale of Rheidol Railway to Devil's Bridge Carmarthen–Aberystwyth line to Carmarthen Aberystwyth River Dyfi Gogarth Abertafol Penhelig Aberdovey Talyllyn Railway to Nant Gwernol Tywyn Wharf Tywyn River Dysynni Tonfanau Llangelynin Llwyngwril Fairbourne Fairbourne Fairbourne Railway to Barmouth Ferry Ruabon–Barmouth line to Ruabon Morfa Mawddach Barmouth Bridge over River Mawddach Barmouth Llanaber Talybont Dyffryn Ardudwy Llanbedr Pensarn Llandanwg Harlech Tygwyn Talsarnau Llandecwyn Pont Briwet over River Dwyryd Penrhyndeudraeth Ffestiniog Railway to Blaenau Ffestiniog & Porthmadog Harbour Minffordd Traeth Mawr Viaduct over Afon Glaslyn Welsh Highland Railway to Caernarfon Cae Pawb Flat Crossing Welsh Highland Railway to Porthmadog Harbour Welsh Highland Heritage Railway to Pen-y-Mount Junction Porthmadog Porthmadog Black Rock Halt Criccieth Afon Wen Carnarvonshire Railway to Caernarvon Penychain Abererch Pwllheli Show route diagram

The Cambrian Line (Welsh: Llinell y Cambrian), sometimes split into the Cambrian Main Line (Welsh: Prif Linell y Cambrian) and Cambrian Coast Line (Welsh: Llinell Arfordir y Cambrian) for its branches, is a railway line that runs from Shrewsbury, England, westwards to Aberystwyth and Pwllheli in Wales. Passenger train services are operated by Transport for Wales Rail between the western terminals of Pwllheli, in Gwynedd, and Aberystwyth, in Ceredigion, and the eastern terminal at Shrewsbury, Shropshire, as part of the Wales & Borders franchise. The railway line is widely regarded as scenic, as it passes through the Cambrian Mountains in central Wales, and along the coast of Cardigan Bay in Snowdonia National Park.

The line includes long sections of rural single track and is designated as a community rail partnership.^[1]

From Shrewsbury, the line heads west through northern Powys, serving the towns of Welshpool and Newtown, then continues further west calling at Caersws and then Machynlleth until reaching Dovey Junction. At Dovey Junction, a short distance west of Machynlleth, the line splits into two branches: the southern branch goes to Aberystwyth, and the longer, northern branch continues to Pwllheli as the Cambrian Coast Line, crossing the River Mawddach by Barmouth Bridge. The section of the Cambrian Line between Shrewsbury and Aberystwyth may be called the Cambrian Main Line.^[2]

The line is made up of:

• Shrewsbury and Welshpool Railway between Shrewsbury and Buttington
• Oswestry and Newtown Railway between Buttington Junction and Newtown
• Llanidloes and Newtown Railway between Newtown and Moat Lane Junction
• Newtown and Machynlleth Railway between Moat Lane Junction and Machynlleth
• Aberystwith and Welsh Coast Railway between Machynlleth and Aberystwyth/Pwllheli

These lines were constructed between 1855 and 1869. The section west of Buttington Junction became part of the Cambrian Railways in 1864.

The Cambrian Railways became part of the Great Western Railway under the Grouping Act of 1921. On nationalisation these lines were operated first by the Western Region of British Railways and later by the London Midland Region. In a later reorganisation, passenger services were operated by the Regional Railways Central sector. Following privatisation in the mid 1990s, passenger services were first operated by Central Trains, then by Wales & Borders from 2001, Arriva Trains Wales from 2003, KeolisAmey Wales from 2018 and publicly-owned Transport for Wales Rail from 2021.

Although the line survived the Beeching Axe, many stations were closed from the 1960s onwards. The stations closed include the following:

Shrewsbury to Dovey Junction:

• Hanwood
• Yockleton
• Westbury
• Plas-y-Court Halt
• Breidden
• Buttington (connection with the Cambrian Railways line to Oswestry)
• Forden
• Montgomery
• Abermule
• Scafell Halt
• Moat Lane Junction (connection with Mid Wales Railway to Brecon)
• Pontdolgoch
• Carno (reopening proposed, application at final stage)
• Talerddig
• Llanbrynmair
• Commins Coch Halt
• Cemmes Road (connection with Mawddwy Railway to Dinas Mawddwy)

Dovey Junction to Aberystwyth:

• Glandyfi
• Ynyslas
• Llandre
• Bow Street (reopened in 2021)

Dovey Junction to Pwllheli:

• Gogarth
• Abertafol
• Llangelynin
• Black Rock Halt
• Afon Wen (connection with the Carnarvonshire Railway to Carnarvon)
• The Ruabon bound platforms at Barmouth Junction were also closed in 1965 and the station renamed Morfa Mawddach.

The Cambrian line was not directly threatened with closure in the 1963 Beeching Report. Later threats to the coastal part of the route, from Dovey Junction to Pwllheli, were subsequently withdrawn. Its tourism role is as a scenic route, as well as linking many coastal resorts and connecting to seven narrow-gauge tourist lines (these are the Talyllyn Railway, Welshpool and Llanfair Railway, Ffestiniog Railway, Welsh Highland Railway and the Vale of Rheidol Railway).^[3]

With long sections of single line and limited passing points, minor disruptions on the Cambrian Line quickly lead to compound delays and partial cancellations. This, combined with short turnaround times at each end of the route, led to severe unpunctuality during much of the first decade of the 21st century. The extension of the service to Birmingham International in late 2008^[4] has helped address this by eliminating the tight turnarounds at the heavily congested Birmingham New Street station. Maintenance changes and additional padding in public timetables has also helped improve performance figures overall.

In Arriva Trains Wales' performance statistics the Cambrian Line was routinely the worst-performing service group between 2003 and 2008. Since early 2009, recorded timekeeping has improved – a considerable achievement, considering that the route has been the testing ground for brand new signalling technology previously unused on the British railway network.

In October 2006, it was announced that Network Rail would pilot the European Rail Traffic Management System on the Cambrian Line. The ERTMS allows headways between trains using the same track to be reduced without affecting safety, allowing a more frequent service. Should the pilot scheme be successful, the system is expected to be rolled out on some other rural routes within the UK.^[6]

The upgrade was expected to cost £59 million and was to be completed by December 2008,^[7] but the system was only released, for limited testing between Pwllheli and Harlech, in February 2010. Three signallers from the Machynlleth signalling centre and seven drivers were trained to operate the new equipment.^[8] Ansaldo STS were the principal contractors for the upgrade, with Thales as sub-contractors for the Telecomms and Eldin as installation subcontractors for all elements of UK infrastructure. Systra was in charge of testing and commissioning the ETCS and interlocking components of the signalling system.

Ansaldo installed ERTMS In Cab ETCS (European Train Control System) level 2, class 1, specification V2.3.0 in 2011 (as noted below). As the name suggests, the driver receives the instructions for movement on the cab display. This level does not require conventional fixed signals – therefore all the existing signals and RETB boards have been removed.^[9] Additionally, the line side speed signs were made redundant – drivers are given the appropriate maximum speed on the cab display (in kilometres per hour).^[10]

The Cambrian ERTMS – Pwllheli to Harlech rehearsal started on 13 February 2010 and completed successfully on 18 February 2010. The driver familiarisation and practical handling stage of the rehearsal provided an excellent opportunity to monitor the use of GSM-R voice in operation on this route. The first train departed Pwllheli at 08:53 in ERTMS Level 2 Operation with GSM-R voice being used as the only means of communication between the driver and the signaller.

Network Rail spokeswoman Mavis Choong was unable to give a figure for how much the scheme has cost, but said £400m was being spent installing it across the UK network. She claimed the 14-month delay was caused by the system "being new".^{[citation needed]}

In 2007, a new flat crossing, named "Cae Pawb Crossing", was installed at the intersection of the Cambrian Line and the Welsh Highland Railway.

In October 2010, following completion of testing, the ERTMS system finally entered service between Pwllheli and Harlech and the previous Radio Electronic Token Block system was removed. On 18 March 2011, the final commissioning phase for the ERTMS system across the whole Cambrian route started, including layout alterations at Welshpool and Talerddig which would facilitate a desired increase in service frequency. At 07:20 on 26 March 2011, the New ERTMS signalling system was placed into operational use across the Cambrian Line controlled from Machynlleth, some 40 minutes ahead of the planned schedule. Two days of driver familiarisation then followed; passenger operation started on 28 March 2011. An initial assessment by the operating company was not favourable: problems with the design and installation of the in-cab displays were identified and infrastructure failures included the control system becoming "confused" by common train movements, such as changes of speed or shunting into the depot.^[11]

In 2018, Network Rail began upgrading 3.7 miles (6.0 km) of track at a cost of £7.5 million.^[12] As well as improving reliability by replacing track, Network Rail and Powys County Council installed over a mile of new road and two road over rail bridges at Ystrad Fawr and Rallt. This has closed eight level crossings and improved safety for local residents.^[13]

The UK Government Transport Secretary Grant Shapps announced on 21 August 2020 that £3m in funding had been authorised to advance plans to upgrade signalling on the 241 km (150 mi) Cambrian line from Shrewsbury Sutton Bridge Junction to Aberystwyth and Pwllheli. "The planned state-of-the-art digital signalling system will modernise the network, improving reliability of services, and supporting the introduction of a new fleet being rolled out across the network in December 2022", the minister said.^[14]

The worst accident on the Cambrian Line – and the worst on the former Cambrian Railways system – occurred on 26 January 1921 on the single-track line between Abermule and Newtown. A westbound stopping train from Whitchurch set off from Abermule without the correct authority, and collided head-on with an eastbound express from Aberystwyth. Seventeen people were killed, including the driver and fireman of the stopping train.

Shortly before 22:00 on Sunday 19 June 2011, a passenger train from Aberystwyth to Machynlleth ran onto the level crossing at Llanbadarn while the barriers at the crossing were raised, and came to a stop with the front of the train about 31 metres (102 ft) beyond the crossing. There were no road vehicles or pedestrians on the crossing at the time.^[15] The immediate cause of the incident was that the train driver did not notice that the indicator close to the crossing was flashing red until it was too late for him to stop the train before it reached the crossing. Factors behind this included the driver's "workload" (his need to observe a screen in the cab at the same time as he should also be observing a lineside indicator), the design of the equipment associated with the operation of the level crossing, and the re-setting of the signalling system on board the train before it could depart from Aberystwyth. An underlying cause of the incident was that the signalling system now in use on the lines from Shrewsbury to Aberystwyth and Pwllheli did not interface with the automatic level crossings on these routes.^[15]

The RAIB made six recommendations, three directed to Network Rail, two to Arriva Trains Wales and one to the Rail Safety and Standards Board (RSSB). These cover the development of engineering solutions to mitigate the risk of trains passing over automatic crossings which have not operated correctly; changes to the operating equipment of Llanbadarn crossing; the processes used by railway operators to request permission to deviate from published standards; the operational requirements of drivers as trains depart from Aberystwyth; and the way in which drivers interact with the information screens of the cab signalling used on the Cambrian lines. The failure at ERTMS System-User Interface investigated by the RAIB indicates that the ERTMS Implementation did not satisfy the non-functional attribute of safety integrity of the real time dependable distributed computing concepts.^[15]

At 19:30 on 21 October 2024 the Shrewsbury to Aberystwyth service and the Machynlleth to Shrewsbury services collided outside of the village of Llanbrynmair, Powys.^[16] The incident resulted in one death and fifteen injuries. Initial inspections by the RAIB found evidence of low rail head adhesion.^[17]

As of May 2023, the Aberystwyth line has a near-hourly service and twelve direct trains between Aberystwyth and Shrewsbury daily,^[18] with several extended to or from Birmingham International. Trains to Pwllheli typically operate once every two hours, either as separate connecting services running to/from Machynlleth, or as portions attached to Aberystwyth services with trains dividing or joining at Machynlleth as necessary.

Trains now run more frequently than before: resignalling of the railway and other infrastructure changes have allowed more trains to run to and from Aberystwyth since 2015. Connections are better too, as some trains run through from Birmingham New Street to Birmingham International.^[19] From the 1990s until 2015, a service had typically been provided between Birmingham and Aberystwyth every two hours, with a reduced service on Sundays. From December 2009 to December 2022, connections were available through calls at Smethwick Galton Bridge.^[20]

Freight services over the line were absent for many years, after regular oil trains were halted in 1993. However, trials in 2003 and again in 2022 have led to the introduction of a regularly weekly train transporting timber from Aberystwyth to the Kronospan woodchip factory in Chirk.^[21] Trains are operated by Colas Rail but are hauled by Class 97 locomotives belonging to Network Rail,^[22] due to the need for trains on the route to be compatible with the ETCS signalling used on the line (97/37 combinations with the 97 in front of the 37 can also be used). The 2003 trial, by contrast, had used a pair of British Rail MPV units sandwiched around a rake of seven open-sided timber wagons.

In 2007, West Coast Railways took over operation of the Cambrian Coast Express which ran over the Cambrian Coast Line from Machynlleth to Porthmadog and Pwllheli, the train was also renamed to The Cambrian. The service would run from the last week of July until the end of August between 2007 and 2010.

Before the 2011 season, WCR issued a statement stating that due to Network Rail's implementation of the new European Rail Traffic Management System (ERTMS) signalling on the Cambrian Coast, which necessitated new in-cab signalling equipment, the seasonal steam services had to cease running because no system was yet available for fitment in steam locomotives. No steam loco owners were planning to upgrade their locos to work under the system in the then-near future, owing to costs and the amount of equipment that was required. Locos that have visited the route over the years include: 7802 Bradley Manor, 7819 Hinton Manor, 44871, 46443, 75069 & 76079.

Following an absence of 14 years it was announced in February 2024, that as part of trials for the fitment of the new ETCS signalling system to steam locomotives, 60163 Tornado is to run overnight testing trains between Shrewsbury and Newtown. The trains will be run during night-time to avoid affecting passenger services.^[23] These trials are also being undertaken as part of Network Rail's East Coast Digital Programme & Pathfinder Project.

Major structural problems with Barmouth Bridge resulted in the withdrawal of services between 1980 and 1986^[24] and the line was threatened with closure before ultimately being repaired and reopened.

Work began in March 2013 to replace the wooden Pont Briwet viaduct over the Afon Dwyryd near Llandecwyn. The new bridge now carries two lanes of road traffic and the single track railway, and opened in 2015.^[25] It was hoped that, apart from a four-week period where power cables had to be moved, the old viaduct could remain open throughout the works.^[26] However, the bridge was found to have been affected by the piling work for the new bridge, and was declared structurally unsafe and closed in December 2013. This necessitated a diversion via Maentwrog for road users and caused rail services to terminate at Harlech. A new temporary bridge was due to open in Spring 2014, but this plan had been scrapped in favour of running a convoy system on the A496 road that served as the diversionary route.^[27][28][29] Work then focused on completing the main railway and road bridge by the end of the year.

In January 2014, the Coast line from Dovey Junction was closed to all trains after two sections of track between Tywyn and Barmouth were severely damaged by storm-force winds and tidal surges at the beginning of the month. Part of the sea wall protecting the trackbed at Llanaber near Barmouth was washed away, resulting in some 300 tons of ballast being lost and the formation covered in debris, whilst further south a section of embankment at Tonfanau was washed out.^[30] Two of Arriva Trains Wales's Class 158 trains were trapped at Barmouth, and were removed by road.^[31] Network Rail described the damage suffered by the line as "devastating", but stated the line to Barmouth could be reopened by 10 February 2014 (it was). Repairs north of Barmouth were completed, and the line reopened to Harlech on 1 May 2014, two weeks ahead of schedule.^[32]

The full line reopened on 1 September 2014.^[33]

• Rail transport in Shropshire
• Heart of Wales Line
• Map of places on 'Cambrian Line' compiled from this article

• Cambrian Lines Partnership
• Cambrian Coast Railway Visitor Guide
• Shrewsbury to Aberystwyth Rail Passengers' Association
• Usage statistics for stations on the line
• Rail Magazine
• Scenic Rail Britain: Cambrian Coast Lines